YNKI Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : emma_allen Date Prepared : 2023-11-28 Report Type : UPDATE If Update: Previous Site Log : (ssss_ccyymmdd.log) Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Yanakie3 Four Character ID : YNKI Monument Inscription : IERS DOMES Number : 59914M001 CDP Number : not available Monument Description : Concrete pillar/stainless steel plate Height of the Monument : 2.0 m Monument Foundation : Bored pier Foundation Depth : 10.0 m Marker Description : Intersection of plate with spigot Date Installed : 2012-12-01T00:00Z Geologic Characteristic : Hard, silting clay with gravel Bedrock Type : QUATERNARY Bedrock Condition : WEATHERED Fracture Spacing : Fault zones nearby : NO Distance/activity : Additional Information : 2. Site Location Information City or Town : Yanakie State or Province : Victoria Country : Australia Tectonic Plate : Australia Approximate Position (ITRF) X coordinate (m) : -4136229.102 Y coordinate (m) : 2767060.494 Z coordinate (m) : -3976117.4869 Latitude (N is +) : -384844.02 Longitude (E is +) : +1461305.56 Elevation (m,ellips.) : 34.6 Additional Information : GDA2020 Coordinates from Regulation 13 : Certificate 3. GNSS Receiver Information 3.1 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5213K83641 Firmware Version : 4.6 Elevation Cutoff Setting : 0 deg Date Installed : 2013-03-06T00:00Z Date Removed : 2016-12-14T04:29Z Temperature Stabiliz. : none Additional Information : Updating firmware date removed 3.2 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5213K83641 Firmware Version : 5.15 Elevation Cutoff Setting : 0 deg Date Installed : 2016-12-14T04:29Z Date Removed : 2016-12-30T00:10Z Temperature Stabiliz. : none Additional Information : Updated FW date installed and removed 3.3 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5213K83641 Firmware Version : 5.20 Elevation Cutoff Setting : 0 deg Date Installed : 2016-12-30T00:12Z Date Removed : 2017-06-29T07:10Z Temperature Stabiliz. : none Additional Information : Updated firmware date removed 3.4 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5213K83641 Firmware Version : 5.22 Elevation Cutoff Setting : 0 deg Date Installed : 2017-06-29T07:13Z Date Removed : 2017-10-17T03:59Z Temperature Stabiliz. : none Additional Information : Updated FW date removed 3.5 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5213K83641 Firmware Version : 5.30 Elevation Cutoff Setting : Date Installed : 2017-10-17T04:02Z Date Removed : 2018-10-01T03:30Z Temperature Stabiliz. : none Additional Information : Updated FW 3.6 Receiver Type : TRIMBLE NETR9 Satellite System : QZSS+GPS+GLO+GAL+BDS Serial Number : 5213K83641 Firmware Version : 5.33 Elevation Cutoff Setting : Date Installed : 2018-10-01T03:30Z Date Removed : 2018-11-22T02:04Z Temperature Stabiliz. : none Additional Information : Updated FW 3.7 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5213K83641 Firmware Version : 5.37 Elevation Cutoff Setting : Date Installed : 2018-11-22T02:04Z Date Removed : 2019-08-12T23:59Z Temperature Stabiliz. : none Additional Information : Updated FW 3.8 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5213K83641 Firmware Version : 5.42 Elevation Cutoff Setting : 0 deg Date Installed : 2019-08-12T23:59Z Date Removed : 2019-10-22T23:47Z Temperature Stabiliz. : none Additional Information : Receiver Firmware Updated 3.9 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5213K83641 Firmware Version : 5.43 Elevation Cutoff Setting : 0 deg Date Installed : 2019-10-22T23:47Z Date Removed : 2020-07-30T02:24Z Temperature Stabiliz. : none Additional Information : FW updated 3.10 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5213K83641 Firmware Version : 5.45,06/MAR/2020 Elevation Cutoff Setting : 0 deg Date Installed : 2020-07-30T02:24Z Date Removed : 2020-10-14T03:00Z Temperature Stabiliz. : none Additional Information : FW version name updated 3.11 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5213K83641 Firmware Version : 5.48,13/AUG/2020 Elevation Cutoff Setting : 0 deg Date Installed : 2020-10-14T03:00Z Date Removed : 2021-05-13T04:34Z Temperature Stabiliz. : none Additional Information : Updated FW 3.12 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5213K83641 Firmware Version : 5.50,29/MAR/2021 Elevation Cutoff Setting : 0 deg Date Installed : 2021-05-13T04:34Z Date Removed : 2021-12-15T04:44Z Temperature Stabiliz. : none Additional Information : Updated FW 3.13 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5953R40050 Firmware Version : 5.45 Elevation Cutoff Setting : Date Installed : 2021-12-15T04:44Z Date Removed : 2022-11-01T05:34Z Temperature Stabiliz. : none Additional Information : 3.14 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5953R40050 Firmware Version : 6.15 Elevation Cutoff Setting : Date Installed : 2022-11-01T05:34Z Date Removed : 2023-11-28T02:54Z Temperature Stabiliz. : none Additional Information : Firmware upgrade only 3.15 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5953R40050 Firmware Version : 6.21 Elevation Cutoff Setting : Date Installed : 2023-11-28T02:54Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : none Additional Information : Firmware update only 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : TRM59800.00 SCIS Serial Number : 5116354144 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : SCIS Radome Serial Number : Antenna Cable Type : CNT-400 Antenna Cable Length : 30.0 m Date Installed : 2013-03-06T00:00Z Date Removed : 2018-01-17T21:35Z Additional Information : This antenna failed on the evening of the : 19/12/2017 due to possible lightning strike. 4.2 Antenna Type : TRM59800.00 SCIS Serial Number : 5620361616 Antenna Reference Point : BAM Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : +27 deg Antenna Radome Type : SCIS Radome Serial Number : Antenna Cable Type : CNT-400 Antenna Cable Length : 30.0 m Date Installed : 2018-01-17T21:35Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : Existing Antenna needed to be replaced due to : failure, updated antenna type to include 20 : characters 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.1 Tied Marker Name : RM1 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -6.558 dy (m) : -3.3329 dz (m) : 7.8947 Accuracy (mm) : 1.0 Survey method : TRILATERATION/TRIANGULATION Date Measured : 2013-02-19T00:00Z Additional Information : 5.2 Tied Marker Name : RM2 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 4.9583 dy (m) : -10.3149 dz (m) : -8.1097 Accuracy (mm) : 1.0 Survey method : TRILATERATION/TRIANGULATION Date Measured : 2013-02-19T00:00Z Additional Information : 5.3 Tied Marker Name : RM3 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 6.4523 dy (m) : 10.6315 dz (m) : 3.8039 Accuracy (mm) : 1.0 Survey method : TRILATERATION/TRIANGULATION Date Measured : 2013-02-19T00:00Z Additional Information : 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : QUARTZ/INTERNAL Input Frequency : 5 MHz Effective Dates : 2013-03-06/(CCYY-MM-DD) Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 120488 Data Sampling Interval : 30 sec Accuracy (% rel h) : 2.00 Aspiration : UNASPIRATED Height Diff to Ant : -0.015 m Calibration date : (CCYY-MM-DD) Effective Dates : 2013-03-06/(CCYY-MM-DD) Notes : (multiple lines) 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 120488 Data Sampling Interval : 30 sec Accuracy : 0.08 hPa Height Diff to Ant : -0.015 m Calibration date : (CCYY-MM-DD) Effective Dates : 2013-03-06/(CCYY-MM-DD) Notes : 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 120488 Data Sampling Interval : 30 sec Accuracy : 0.50 deg Aspiration : UNASPIRATED Height Diff to Ant : -0.015 m Calibration date : (CCYY-MM-DD) Effective Dates : 2013-03-06/(CCYY-MM-DD) Notes : 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.1 Signal Obstructions : TREES Effective Dates : 2013-03-06/(CCYY-MM-DD) Additional Information : 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : 101 Jerrabomberra Ave Symonston 2609 Australia Primary Contact Contact Name : Network Operator Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : GPSnet Support Telephone (primary) : Telephone (secondary) : Fax : E-mail : GPSnet.support@delwp.vic.gov.au Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : 101 Jerrabomberra Ave Symonston 2609 Australia Primary Contact Contact Name : Network Operator Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : http://gnss.vicpos.com.au Secondary Data Center : http://www.gpsnet.com.au URL for More Information : http://gnss.vicpos.com.au/Map/SensorMap.aspx Hardcopy on File Site Map : Y Site Diagram : Y Horizon Mask : Y Monument Description : Y Site Pictures : Y Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra)