WIL1 Site Information Form PADT Continuously Operating Reference Station See Instructions at: ftp://www.igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Don Haw Date Prepared : 2020-08-03 Report Type : UPDATE If Update: Previous Site Log : wil1_20180831.log Modified/Added Sections : 3.10 1. Site Identification of the GNSS Monument Site Name : Wilkes Barre Four Character ID : WIL1 Monument Inscription : IERS DOMES Number : 49464M001 CDP Number : (A4) Monument Description : STEEL ROD Height of the Monument : (m) Monument Foundation : ROOF/CHIMNEY PARAPET Foundation Depth : (m) Marker Description : (CHISELLED CROSS/DIVOT/BRASS NAIL/etc) Date Installed : 1996-12-06T00:00Z Geologic Characteristic : (BEDROCK/CLAY/CONGLOMERATE/GRAVEL/SAND/etc) Bedrock Type : (IGNEOUS/METAMORPHIC/SEDIMENTARY) Bedrock Condition : (FRESH/JOINTED/WEATHERED) Fracture Spacing : (1-10 cm/11-50 cm/51-200 cm/over 200 cm) Fault zones nearby : (YES/NO/Name of the zone) Distance/activity : (multiple lines) Additional Information : Domes number added 24-MAR-2005. 2. Site Location Information City or Town : Lehman (8 miles NW of Wilkes Barre) State or Province : Pennsylvania Country : United States Tectonic Plate : North American Approximate Position (ITRF) X coordinate (m) : 1159635.104 Y coordinate (m) : -4656342.331 Z coordinate (m) : 4188203.341 Latitude (N is +) : +411818.94 Longitude (E is +) : -0760055.11 Elevation (m,ellips.) : 384.4 Additional Information : ARP IGS08 POSITION (EPOCH 2005.00) : Computed in Aug 2011 using data through gpswk : 1631. 3. GNSS Receiver Information 3.1 Receiver Type : TRIMBLE 4000SSI Satellite System : GPS Serial Number : 3613A15012 Firmware Version : 7.22 Elevation Cutoff Setting : (deg) Date Installed : 1996-12-06 Date Removed : 1998-08-10 Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : Firmware replaced. 3.2 Receiver Type : TRIMBLE 4000SSI Satellite System : GPS Serial Number : 3613A15012 Firmware Version : 7.29 Elevation Cutoff Setting : (deg) Date Installed : 1999-08-10 Date Removed : 2005-12-06 Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : Receiver removed. 3.3 Receiver Type : TRIMBLE 4000SSI Satellite System : GPS Serial Number : 3613A15013 Firmware Version : 7.32 Elevation Cutoff Setting : (deg) Date Installed : 2005-12-06 Date Removed : 2006-08-30 Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : Receiver replaced. 3.4 Receiver Type : TRIMBLE 4700 Satellite System : GPS Serial Number : 0220164628 Firmware Version : 1.30 Elevation Cutoff Setting : 5 Date Installed : 2006-08-30 Date Removed : 2011-06-01 Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : Receiver removed. 3.5 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5048K72013 Firmware Version : 4.17 Elevation Cutoff Setting : 5 Date Installed : 2011-06-01 Date Removed : 2011-09-13 Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : Firmware upgrade. 3.6 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5048K72013 Firmware Version : 4.43 Elevation Cutoff Setting : 5 Date Installed : 2011-09-13 Date Removed : 2012-04-16 Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : Receiver installed. 3.7 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5048K72013 Firmware Version : 4.46 Elevation Cutoff Setting : 5 Date Installed : 2012-04-16 Date Removed : 2016-01-22T14:09Z Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : Receiver installed. 3.8 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5304K49994 Firmware Version : 5.10 Elevation Cutoff Setting : 5 deg Date Installed : 2016-01-22T14:09Z Date Removed : 2018-08-27T14:30Z Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : Receiver replaced, temp repair 3.9 Receiver Type : TRIMBLE NETR3 Satellite System : GPS+GLO Serial Number : 4934K63381 Firmware Version : 4.17 Elevation Cutoff Setting : 5 deg Date Installed : 2018-08-27T14:35Z Date Removed : 2020-02-05T18:08Z Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 3.10 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+GLO Serial Number : 5920R40047 Firmware Version : 5.43 Elevation Cutoff Setting : 5 deg Date Installed : 2020-02-05T18:08Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : new receiver 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : TRM22020.00+GP NONE Serial Number : 0220054184 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0000 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : Antenna Radome Type : NONE Radome Serial Number : (A4 from rcvr_ant.tab; see instructions) Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : 1996-12-06 Date Removed : 1997-06-03 Additional Information : Antenna removed 4.2 Antenna Type : TRM22020.00+GP NONE Serial Number : 0220054190 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0000 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : Antenna Radome Type : NONE Radome Serial Number : (A4 from rcvr_ant.tab; see instructions) Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : 1997-06-03 Date Removed : 2011-06-01 Additional Information : Antenna removed 4.3 Antenna Type : TRM57971.00 NONE Serial Number : 1441040452 Antenna Reference Point : BAM Marker->ARP Up Ecc. (m) : 0.0000 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : Antenna Radome Type : NONE Radome Serial Number : (A4 from rcvr_ant.tab; see instructions) Antenna Cable Type : LMR400 Antenna Cable Length : 30m Date Installed : 2011-06-01 Date Removed : 2016-01-22T14:09Z Additional Information : Antenna installed : 22-JAN-2016 Antenna change 4.4 Antenna Type : TRM57971.00 NONE Serial Number : 5000117557 Antenna Reference Point : BAM Marker->ARP Up Ecc. (m) : 0.0000 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : (A4 from rcvr_ant.tab; see instructions) Antenna Cable Type : LMR400 Antenna Cable Length : 30m Date Installed : 2016-01-22T14:09Z Date Removed : 2018-08-27T14:30Z Additional Information : Antenna installed 4.5 Antenna Type : TRM115000.10 NONE Serial Number : 1441016110 Antenna Reference Point : BAM Marker->ARP Up Ecc. (m) : 0.0000 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : (A4 from rcvr_ant.tab; see instructions) Antenna Cable Type : LMR400 Antenna Cable Length : 30m Date Installed : 2018-08-27T14:35Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : (if external) Effective Dates : 1996-12-06/CCYY-MM-DD Notes : (multiple lines) 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interference : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDLINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Pennsylvania State University Preferred Abbreviation : PSU Mailing Address : Wilkes-Barre Campus : P.O. Box PSU : Lehman, PA 18627 Primary Contact Contact Name : Charles Harpster Telephone (primary) : 717-425-5944 Telephone (secondary) : Fax : E-mail : charpster@pa.gov Secondary Contact Contact Name : Charles Ghilani Telephone (primary) : 570-675-9127 Telephone (secondary) : Fax : E-mail : cdg3@psu.edu Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : Pennsylvania Department of Transportation Preferred Abbreviation : PADT Mailing Address : Photogrammetry and Surveys Section : 81 Lab Lane : Harrisburg, PA 17110 Primary Contact Contact Name : Stephen M. Moore Telephone (primary) : 717-425-5944 Telephone (secondary) : 717-614-3480 Fax : E-mail : stepmoore@pa.gov Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : ftp://geodesy.noaa.gov/cors Secondary Data Center : ftp://alt.ngs.noaa.gov/cors URL for More Information : https://geodesy.noaa.gov/CORS Hardcopy on File Site Map : (Y or URL) Site Diagram : (Y or URL) Horizon Mask : (Y or URL) Monument Description : (Y or URL) Site Pictures : (Y or URL) Additional Information : (multiple lines) Antenna Graphics with Dimensions ftp://www.igs.org/pub/station/general/antenna.gra