STR3 Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : rudemans Date Prepared : 2023-11-27 Report Type : UPDATE If Update: Previous Site Log : (ssss_ccyymmdd.log) Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Stromlo 3 Four Character ID : STR3 Monument Inscription : STR06 IERS DOMES Number : 50119M005 CDP Number : Monument Description : Concrete pillar/stainless steel plate Height of the Monument : 1.8 m Monument Foundation : Bedrock Foundation Depth : 2.5 m Marker Description : Intersection of plate with spigot Date Installed : 2010-09-15T00:00Z Geologic Characteristic : BEDROCK Bedrock Type : IGNEOUS Bedrock Condition : Fresh Fracture Spacing : Fault zones nearby : Distance/activity : Additional Information : The intersection of the stainless steel pillar : plate with the vertical axis of a 5/8" Whitworth : threaded stainless steel spigot 2. Site Location Information City or Town : Canberra State or Province : Australian Capital Territory Country : Australia Tectonic Plate : AUSTRALIAN Approximate Position (ITRF) X coordinate (m) : -4467085.288 Y coordinate (m) : 2683047.7423 Z coordinate (m) : -3666962.805 Latitude (N is +) : -351856.47 Longitude (E is +) : +1490035.55 Elevation (m,ellips.) : 799.0 Additional Information : 3. GNSS Receiver Information 3.1 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO+GAL Serial Number : 495612 Firmware Version : 8.00/4.010.S9 Elevation Cutoff Setting : 0 deg Date Installed : 2010-09-15T00:00Z Date Removed : 2010-10-06T00:00Z Temperature Stabiliz. : none Additional Information : Measurement engine is non-commerical version 3.2 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO+GAL Serial Number : 495612 Firmware Version : 8.01/4.010.S9 Elevation Cutoff Setting : 0 deg Date Installed : 2010-10-06T00:00Z Date Removed : 2012-01-17T00:00Z Temperature Stabiliz. : none Additional Information : Measurement engine is non-commerical version 3.3 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO+GAL Serial Number : 495612 Firmware Version : 8.50/6.110 Elevation Cutoff Setting : 0 deg Date Installed : 2012-01-17T00:00Z Date Removed : 2012-12-11T00:00Z Temperature Stabiliz. : none Additional Information : 3.4 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO+GAL Serial Number : 495612 Firmware Version : 8.51/6.111 Elevation Cutoff Setting : 0 deg Date Installed : 2012-12-11T00:00Z Date Removed : 2013-05-14T04:30Z Temperature Stabiliz. : none Additional Information : 3.5 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO+GAL Serial Number : 495612 Firmware Version : 8.70/6.112 Elevation Cutoff Setting : 0 deg Date Installed : 2013-05-14T04:30Z Date Removed : 2015-07-28T00:00Z Temperature Stabiliz. : none Additional Information : 3.6 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO+GAL Serial Number : 495612 Firmware Version : 9.20/6.404 Elevation Cutoff Setting : 0 deg Date Installed : 2015-07-28T00:00Z Date Removed : 2019-03-07T06:15Z Temperature Stabiliz. : none Additional Information : Firmware update only 3.7 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO Serial Number : 495611 Firmware Version : 9.20/6.405 Elevation Cutoff Setting : 0 deg Date Installed : 2019-03-07T06:20Z Date Removed : 2020-01-30T03:11Z Temperature Stabiliz. : none Additional Information : 3.8 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5921R40193 Firmware Version : 5.42 Elevation Cutoff Setting : 0 deg Date Installed : 2020-01-30T03:11Z Date Removed : 2020-03-22T22:33Z Temperature Stabiliz. : 0.0 Additional Information : 3.9 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5921R40193 Firmware Version : 5.43 Elevation Cutoff Setting : 0 deg Date Installed : 2020-03-22T22:33Z Date Removed : 2022-10-31T01:18Z Temperature Stabiliz. : 0.0 Additional Information : Firmware upgrade only 3.10 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5921R40193 Firmware Version : 6.15 Elevation Cutoff Setting : 0 deg Date Installed : 2022-10-31T01:18Z Date Removed : 2023-11-27T23:08Z Temperature Stabiliz. : 0.0 Additional Information : Firmware upgrade only 3.11 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5921R40193 Firmware Version : 6.21 Elevation Cutoff Setting : 0 deg Date Installed : 2023-11-27T23:08Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : 0.0 Additional Information : Firmware update only. 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : LEIAR25.R3 NONE Serial Number : 09330013 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.1800 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : LMR400 Antenna Cable Length : 50.0 m Date Installed : 2010-09-15T00:00Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : The antenna height was originally reported as : 0.2687 m this was found to be incorrect and : amended 2015-03-17. Lightning arrestor : installed inline with antenna cable on : 05/05/2022 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : QUARTZ/INTERNAL Input Frequency : Effective Dates : 2010-09-15/2011-04-18 Notes : 6.2 Standard Type : CESIUM Input Frequency : 10 MHz Effective Dates : 2011-04-18/2013-05-14 Notes : Symetricon 5071A S/N: US49352693 6.3 Standard Type : QUARTZ/INTERNAL Input Frequency : Effective Dates : 2013-05-14/2013-05-22 Notes : 6.4 Standard Type : CESIUM Input Frequency : 10 MHz Effective Dates : 2013-05-22/2014-01-20 Notes : 06:55Z Symetricon 5071A S/N: US49352693 6.5 Standard Type : QUARTZ/INTERNAL Input Frequency : Effective Dates : 2014-01-20/2014-01-23 Notes : 6.6 Standard Type : CESIUM Input Frequency : 10 MHz Effective Dates : 2014-01-23/2019-03-06 Notes : 06:55Z Symetricon 5071A S/N: US49352693 6.7 Standard Type : INTERNAL Input Frequency : Effective Dates : 2019-03-06/2019-03-07 Notes : 6.8 Standard Type : CESIUM Input Frequency : 10 MHz Effective Dates : 2019-03-07/(CCYY-MM-DD) Notes : 06:55Z Symetricon 5071A S/N: US49352693 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 Canberra 2601 Australia Primary Contact Contact Name : Geoscience Australia Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 Canberra ACT 2601 AUSTRALIA Canberra 2601 Australia Primary Contact Contact Name : Geoscience Australia Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : GA Secondary Data Center : CDDIS URL for More Information : http://www.ga.gov.au Hardcopy on File Site Map : Y Site Diagram : Y Horizon Mask : Y Monument Description : Y Site Pictures : Y Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra)