SASS Site Information Form (site log) International GNSS Service See Instructions at: https://files.igscb.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : GREF Operator Date Prepared : 2022-09-05 Report Type : UPDATE If Update: Previous Site Log : sass_20211108.log Modified/Added Sections : 11 1. Site Identification of the GNSS Monument Site Name : Sassnitz Four Character ID : SASS Monument Inscription : IERS DOMES Number : 14281M001 CDP Number : (A4) Monument Description : STEEL TRIPOD Height of the Monument : 2.0 m Monument Foundation : STEEL TRIPOD ANCHORED TO THE TOWER Foundation Depth : (m) Marker Description : SURVEY MARKER BOLT ON STEEL TRIPOD Date Installed : 2002-12-12T12:00Z Geologic Characteristic : (BEDROCK/CLAY/CONGLOMERATE/GRAVEL/SAND/etc) Bedrock Type : (IGNEOUS/METAMORPHIC/SEDIMENTARY) Bedrock Condition : (FRESH/JOINTED/WEATHERED) Fracture Spacing : (0 cm/1-10 cm/11-50 cm/51-200 cm/over 200 cm) Fault zones nearby : (YES/NO/Name of the zone) Distance/activity : (multiple lines) Additional Information : Survey Marker Bolt on a steel tripod, : fastened on the platform on the top : of the tower in the harbour of Sassnitz. : The Survey Marker Bolt is 31 m above : the ground. 2. Site Location Information City or Town : Sassnitz Island of Ruegen State or Province : Mecklenburg-Vorpommern Country : Germany Tectonic Plate : EURASIAN Approximate Position (ITRF) X coordinate (m) : 3606146.380 Y coordinate (m) : 875303.140 Z coordinate (m) : 5170194.740 Latitude (N is +) : +543048.93 Longitude (E is +) : +0133835.84 Elevation (m,ellips.) : 69.0 Additional Information : (multiple lines) 3. GNSS Receiver Information 3.1 Receiver Type : JPS LEGACY Satellite System : GPS+GLO Serial Number : AGL2LHV3XMO Firmware Version : E_GGD_2/2.2 Elevation Cutoff Setting : 5 deg Date Installed : 2002-12-12T12:00Z Date Removed : 2003-01-24T12:00Z Temperature Stabiliz. : none Additional Information : Addition Number : 235-0281 on the : type level 3.2 Receiver Type : JPS LEGACY Satellite System : GPS+GLO Serial Number : AEAEYZVWY68 Firmware Version : E_GGD_2/2.2 Elevation Cutoff Setting : 5 deg Date Installed : 2003-01-24T12:00Z Date Removed : 2003-12-05T10:00Z Temperature Stabiliz. : none Additional Information : Additional Number : LE 5772 on the : type level 3.3 Receiver Type : JPS LEGACY Satellite System : GPS+GLO Serial Number : AEAEYZVWY68 Firmware Version : E_GGD_2/2.3P3 Elevation Cutoff Setting : 5 deg Date Installed : 2003-12-05T10:00Z Date Removed : 2005-04-25T09:00Z Temperature Stabiliz. : none Additional Information : Additional Number : LE 5772 on the : type level 3.4 Receiver Type : JPS LEGACY Satellite System : GPS+GLO Serial Number : AEAEYZVWY68 Firmware Version : E_GGD_2/2.3p4 Elevation Cutoff Setting : 5 deg Date Installed : 2005-04-25T09:00Z Date Removed : 2006-05-22T14:00Z Temperature Stabiliz. : none Additional Information : Additional Number : LE 5772 on the : type level 3.5 Receiver Type : JPS LEGACY Satellite System : GPS+GLO Serial Number : AEAEYZVWY68 Firmware Version : E_GGD_2/2.5P1 Elevation Cutoff Setting : 0 deg Date Installed : 2006-05-22T14:00Z Date Removed : 2007-05-11T07:00Z Temperature Stabiliz. : none Additional Information : Additional Number : LE 5772 on the : type level 3.6 Receiver Type : JPS LEGACY Satellite System : GPS+GLO Serial Number : AEAEYZVWY68 Firmware Version : 2.6.0 APR,18,2007 Elevation Cutoff Setting : 0 deg Date Installed : 2007-05-11T07:00Z Date Removed : 2008-01-25T11:15Z Temperature Stabiliz. : none Additional Information : Additional Number : LE 5772 on the : type level 3.7 Receiver Type : JPS LEGACY Satellite System : GPS+GLO Serial Number : AEAEYZVWY68 Firmware Version : 2.6.1 JAN,10,2008 Elevation Cutoff Setting : 0 deg Date Installed : 2008-01-25T11:15Z Date Removed : 2019-02-28T23:59Z Temperature Stabiliz. : none Additional Information : Additional Number LE 5772 on the type level 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : TPSCR3_GGD CONE Serial Number : 00106 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.1850 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : CONE Radome Serial Number : Antenna Cable Type : Aircom plus Antenna Cable Length : 50 m Date Installed : 2002-12-12T12:00Z Date Removed : 2003-10-23T07:00Z Additional Information : (multiple lines) 4.2 Antenna Type : TPSCR3_GGD CONE Serial Number : 217 0155 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.1850 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : CONE Radome Serial Number : Antenna Cable Type : Aircom plus Antenna Cable Length : 50 m Date Installed : 2003-10-23T07:00Z Date Removed : 2004-08-24T12:00Z Additional Information : (multiple lines) 4.3 Antenna Type : TPSCR3_GGD CONE Serial Number : 217 0155 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 0.0310 Marker->ARP North Ecc(m) : 0.0000 Marker->ARP East Ecc(m) : 0.0000 Alignment from True N : 0 deg Antenna Radome Type : CONE Radome Serial Number : Antenna Cable Type : Aircom plus Antenna Cable Length : 50 m Date Installed : 2004-08-24T12:00Z Date Removed : 2019-02-28T23:59Z Additional Information : (multiple lines) 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : (if external) Effective Dates : 2002-12-12/CCYY-MM-DD Notes : (multiple lines) 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : PT35108 Manufacturer : Vaisala Oyi Serial Number : X321 Data Sampling Interval : 900 sec Accuracy (% rel h) : 1 % rel h Aspiration : CAPACITIVY THIN FILM POLYMER Height Diff to Ant : 0.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2002-12-12/2006-07-26 Notes : The humidity sensor is 0.5 m : below the antenna. 8.1.2 Humidity Sensor Model : HMP45A-P Manufacturer : VAISALA Oyi Serial Number : A2110013 Data Sampling Interval : 10 sec Accuracy (% rel h) : 2 % rel h Aspiration : CAPACITIVY THIN FILM POLYMER Height Diff to Ant : 0.5 m Calibration date : 2005-05-23 Effective Dates : 2006-07-26/CCYY-MM-DD Notes : The humidity sensor is 0.5 m : below the antenna. 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : PTU Manufacturer : Vaisala Oyi Serial Number : X2930001 Data Sampling Interval : 900 sec Accuracy : 0.1 hPa Height Diff to Ant : 29.4 m Calibration date : (CCYY-MM-DD) Effective Dates : 2002-12-12/2006-07-26 Notes : The pressure Sensor is : 29.4 m below the antenna. 8.2.2 Pressure Sensor Model : PTU200 Manufacturer : VAISALA Oyi Serial Number : W5110012 Data Sampling Interval : 10 sec Accuracy : 0.1 hPa Height Diff to Ant : -29.4 m Calibration date : 2002 Effective Dates : 2006-07-26/CCYY-MM-DD Notes : The pressure Sensor is : 29.4 m below the antenna. 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : PT35108 Manufacturer : Vaisala Oyi Serial Number : X321 Data Sampling Interval : 900 sec Accuracy : 0.2 deg C Aspiration : RESISTIVE PLATINUM PROBE Height Diff to Ant : 0.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2002-12-12/2006-07-26 Notes : The temperature sensor is : 0.5 m below the antenna. 8.3.2 Temp. Sensor Model : HMP45A-P Manufacturer : VAISALA Oyi Serial Number : A2110013 Data Sampling Interval : 10 sec Accuracy : 0.2 deg C Aspiration : RESISTIVE PLATINUM PROBE Height Diff to Ant : 0.5 m Calibration date : 2005-05-23 Effective Dates : 2006-07-26/CCYY-MM-DD Notes : The temperature sensor is : 0.5 m below the antenna. 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Bundesamt fuer Kartographie und Geodaesie : Department of Geodaesie Preferred Abbreviation : BKG Mailing Address : Richard-Strauss-Allee 11 : D-60598 Frankfurt a.M. : Germany Primary Contact Contact Name : GREF Operator Telephone (primary) : +49 341 5634410 Telephone (secondary) : +49 341 5634432 Fax : +49 341 5634415 E-mail : operator.gref@bkg.bund.de Secondary Contact Contact Name : BKG GNSS Data Center Telephone (primary) : +49 69 6333274 Telephone (secondary) : +49 69 63331 Fax : +49 69 6333425 E-mail : bkg-gdc@bkg.bund.de Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : (multiple lines) Preferred Abbreviation : (A10) Mailing Address : (multiple lines) Primary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : BKG Secondary Data Center : BEV URL for More Information : gref.bkg.bund.de Hardcopy on File Site Map : (Y or URL) Site Diagram : (Y or URL) Horizon Mask : (Y or URL) Monument Description : (Y or URL) Site Pictures : Y Additional Information : (multiple lines) Antenna Graphics with Dimensions Topcon Positioning Systems: TPSCR3_GGD --------- / + \ <-- 0.104 L2 | + | <-- 0.081 L1 +--------------------------------------------------+ <-- 0.071 TCR | | | | | | | | +-----------------+-------------+------------------+ <-- 0.003 BCR +-----x-----+ <-- 0.0 BPA=ARP +---+ | | | | | | | | | | | | +---+ +---------+---+----------+ <-- -0.0310 ARP: Antenna Reference Point L1 : L1 Phase Center L2 : L2 Phase Center TCR: Top of Chokering BCR: Bottom of Chokering TGP: Top of Ground Plane BGP: Bottom of Ground Plane