RNIS Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : daniel.woolcott Date Prepared : 2023-06-26 Report Type : UPDATE If Update: Previous Site Log : (ssss_ccyymmdd.log) Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Raine Island Four Character ID : RNIS Monument Inscription : IERS DOMES Number : AUM000429 CDP Number : Monument Description : Stainless steel pole Height of the Monument : 1.579 m Monument Foundation : Deep drilled into flat reef Foundation Depth : 4.1 m Marker Description : Brass threaded bolt in stainless steel bracket Date Installed : 2015-01-23T00:00Z Geologic Characteristic : Sand Bedrock Type : Reef Flat Bedrock Condition : Fracture Spacing : Fault zones nearby : Distance/activity : Additional Information : 2. Site Location Information City or Town : Raine Island State or Province : Queensland Country : Australia Tectonic Plate : Australian Approximate Position (ITRF) X coordinate (m) : -5057683.7854 Y coordinate (m) : 3670158.3885 Z coordinate (m) : -1272977.0719 Latitude (N is +) : -113522.49 Longitude (E is +) : +1440159.23 Elevation (m,ellips.) : 77.3 Additional Information : 7.421m LAT Elevation, Spirit leveled from State : Survey Marks 159077 & 194317. Subtract 1.42m for : MSL, Top of post (SS SECO adaptor/BAM) 7.456m : LAT. Tidal datum from tidal obs 1/12/2012. 3. GNSS Receiver Information 3.1 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO+GAL+QZSS Serial Number : 495609 Firmware Version : 8.51/6.110 Elevation Cutoff Setting : 10 deg Date Installed : 2015-03-01T00:00Z Date Removed : 2017-11-29T08:20Z Temperature Stabiliz. : none Additional Information : 3.2 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+QZSS+SBAS+GLO+GAL+BDS Serial Number : 5207K82216 Firmware Version : 5.33 Elevation Cutoff Setting : 0 deg Date Installed : 2017-11-29T08:20Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : none Additional Information : Updated firmware to version 5.33 9/5/2018 at : 10:20AM 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : LEIAX1203+GNSS NONE Serial Number : 09380027 Antenna Reference Point : BAM Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : LMR400 Antenna Cable Length : 35.2 m Date Installed : 2015-03-01T00:00Z Date Removed : 2018-06-27T00:15Z Additional Information : Removed 29/11/17 16:00 and replaced on the mount : at 20:15 local time 4.2 Antenna Type : SEPCHOKE_B3E6 SPKE Serial Number : 5037 Antenna Reference Point : ARP Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : SPKE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : Date Installed : 2018-06-27T00:15Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : WXT536 Manufacturer : Vaisala Serial Number : N3030049 Data Sampling Interval : 30 sec Accuracy (% rel h) : 3.00 Aspiration : Height Diff to Ant : 4.08 m Calibration date : 2017-08-15 Effective Dates : 2018-10-30/(CCYY-MM-DD) Notes : 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : WXT536 Manufacturer : Vaisala Serial Number : N3030049 Data Sampling Interval : 30 sec Accuracy : 0.50 hPa Height Diff to Ant : 4.08 m Calibration date : 2017-08-15 Effective Dates : 2018-10-30/(CCYY-MM-DD) Notes : 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : WXT536 Manufacturer : Vaisala Serial Number : N3030049 Data Sampling Interval : 30 sec Accuracy : 0.00 deg Aspiration : Height Diff to Ant : 4.08 m Calibration date : 2017-08-15 Effective Dates : 2018-10-30/(CCYY-MM-DD) Notes : 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Department of Resources Preferred Abbreviation : Mailing Address : Level 8, 1 William Street Brisbane 4000 Australia Primary Contact Contact Name : Geodesy and Positioning Telephone (primary) : +61 7 3330 4498 Telephone (secondary) : +61 7 3330 4427 Fax : E-mail : GeodeticSupport@resources.qld.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : Department of Resources Preferred Abbreviation : Mailing Address : Level 8, 1 William Street Brisbane 4000 Australia Primary Contact Contact Name : Geodesy and Positioning Telephone (primary) : +61 7 3330 4498 Telephone (secondary) : +61 7 3330 4427 Fax : E-mail : GeodeticSupport@resources.qld.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : Secondary Data Center : URL for More Information : Hardcopy on File Site Map : Site Diagram : Horizon Mask : Monument Description : Site Pictures : Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra)