MTEM Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : eric_hay Date Prepared : 2023-11-28 Report Type : UPDATE If Update: Previous Site Log : (ssss_ccyymmdd.log) Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Mount Emu Four Character ID : MTEM Monument Inscription : IERS DOMES Number : 59954M001 CDP Number : Not available Monument Description : Concrete pillar/stainless steel plate Height of the Monument : 2.0 m Monument Foundation : Bedrock Foundation Depth : 0.6 m Marker Description : Intersection of plate with spigot Date Installed : 2011-05-12T00:00Z Geologic Characteristic : GRANITE ROCK Bedrock Type : DEVONIAN Bedrock Condition : GOOD Fracture Spacing : Fault zones nearby : NO Distance/activity : Additional Information : 2. Site Location Information City or Town : Mount Emu State or Province : Victoria Country : Australia Tectonic Plate : Australia Approximate Position (ITRF) X coordinate (m) : -4065544.748 Y coordinate (m) : 3013958.962 Z coordinate (m) : -3869590.327 Latitude (N is +) : -373515.42 Longitude (E is +) : +1432656.07 Elevation (m,ellips.) : 518.0 Additional Information : Provisional GDA2020 coordinates from AUSPOS job : #2093 3. GNSS Receiver Information 3.1 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO Serial Number : 495571 Firmware Version : 8.10/4.004 Elevation Cutoff Setting : 0 deg Date Installed : 2011-05-12T00:00Z Date Removed : 2012-02-09T23:40Z Temperature Stabiliz. : none Additional Information : 3.2 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO Serial Number : 495571 Firmware Version : 8.50/6.110 Elevation Cutoff Setting : 0 deg Date Installed : 2012-02-09T23:40Z Date Removed : 2013-02-15T00:00Z Temperature Stabiliz. : none Additional Information : FW update 3.3 Receiver Type : LEICA GRX1200+GNSS Satellite System : GPS+GLO Serial Number : 495571 Firmware Version : 8.50/6.112 Elevation Cutoff Setting : 0 deg Date Installed : 2013-05-15T00:00Z Date Removed : 2017-07-21T02:13Z Temperature Stabiliz. : none Additional Information : Updated cutoff value from 10 to 0 3.4 Receiver Type : LEICA GR50 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 1870579 Firmware Version : 4.11.606 / 7.102 Elevation Cutoff Setting : 0 deg Date Installed : 2017-07-21T04:14Z Date Removed : 2018-10-17T04:03Z Temperature Stabiliz. : none Additional Information : Updated cut off value from 10 to 0 3.5 Receiver Type : LEICA GR50 Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 1870579 Firmware Version : 4.31 Elevation Cutoff Setting : 0 deg Date Installed : 2018-10-17T04:03Z Date Removed : 2019-08-12T23:35Z Temperature Stabiliz. : none Additional Information : Updated FW 3.6 Receiver Type : LEICA GR50 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 1870579 Firmware Version : 4.35.183 Elevation Cutoff Setting : 0 deg Date Installed : 2019-08-12T23:35Z Date Removed : 2020-02-17T22:00Z Temperature Stabiliz. : none Additional Information : Receiver Firmware Updated 3.7 Receiver Type : LEICA GR50 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 1871253 Firmware Version : 4.35.183 Elevation Cutoff Setting : 0 deg Date Installed : 2020-02-17T22:00Z Date Removed : 2020-08-27T02:21Z Temperature Stabiliz. : none Additional Information : New receiver installed 3.8 Receiver Type : LEICA GR50 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 1871253 Firmware Version : 4.35.188 Elevation Cutoff Setting : 0 deg Date Installed : 2020-08-27T02:21Z Date Removed : 2021-07-15T09:53Z Temperature Stabiliz. : none Additional Information : FW updated 3.9 Receiver Type : LEICA GR50 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 1871253 Firmware Version : 4.50.274 Elevation Cutoff Setting : 0 deg Date Installed : 2021-07-15T09:53Z Date Removed : 2021-10-07T00:50Z Temperature Stabiliz. : none Additional Information : FW updated 3.10 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5951R40182 Firmware Version : 5.44 Elevation Cutoff Setting : 0 deg Date Installed : 2021-10-07T00:50Z Date Removed : 2022-10-31T22:18Z Temperature Stabiliz. : none Additional Information : 3.11 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5951R40182 Firmware Version : 6.15 Elevation Cutoff Setting : 0 deg Date Installed : 2022-10-31T22:18Z Date Removed : 2023-11-28T02:14Z Temperature Stabiliz. : none Additional Information : Firmware update only 3.12 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 5951R40182 Firmware Version : 6.21 Elevation Cutoff Setting : 0 deg Date Installed : 2023-11-28T02:14Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : none Additional Information : Firmware update only 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : LEIAR25.R3 NONE Serial Number : 09370005 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : CNT-400 Antenna Cable Length : 40.0 m Date Installed : 2011-05-12T00:00Z Date Removed : 2013-02-15T00:00Z Additional Information : Lightning strike damage 4.2 Antenna Type : TRM59800.00 NONE Serial Number : 5220354497 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : CNT-400 Antenna Cable Length : 40.0 m Date Installed : 2013-05-15T00:00Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.1 Tied Marker Name : MTEMUTRIG Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 1.4739 dy (m) : 3.1698 dz (m) : 3.7609 Accuracy (mm) : 1.0 Survey method : TRILATERATION/TRIANGULATION Date Measured : 2012-02-21T00:00Z Additional Information : 5.2 Tied Marker Name : RM1 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -4.0948 dy (m) : 0.4377 dz (m) : 8.0207 Accuracy (mm) : 1.0 Survey method : TRILATERATION/TRIANGULATION Date Measured : 2012-02-21T00:00Z Additional Information : 5.3 Tied Marker Name : RM2 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 4.1311 dy (m) : -3.5119 dz (m) : -2.8976 Accuracy (mm) : 1.0 Survey method : TRILATERATION/TRIANGULATION Date Measured : 2012-02-21T00:00Z Additional Information : 5.4 Tied Marker Name : RM3 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 5.7022 dy (m) : 10.1758 dz (m) : 5.4381 Accuracy (mm) : 1.0 Survey method : TRILATERATION/TRIANGULATION Date Measured : 2012-02-21T00:00Z Additional Information : 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : QUARTZ/INTERNAL Input Frequency : 5 MHz Effective Dates : 2011-05-12/(CCYY-MM-DD) Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 114958 Data Sampling Interval : 30 sec Accuracy (% rel h) : 2.00 Aspiration : UNASPIRATED Height Diff to Ant : -0.514 m Calibration date : (CCYY-MM-DD) Effective Dates : 2012-02-22/2013-02-15 Notes : Lightning strike damage 8.1.2 Humidity Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 127302 Data Sampling Interval : 30 sec Accuracy (% rel h) : 2.00 Aspiration : UNASPIRATED Height Diff to Ant : -0.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2013-06-13/(CCYY-MM-DD) Notes : 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 114958 Data Sampling Interval : 30 sec Accuracy : 0.08 hPa Height Diff to Ant : -0.514 m Calibration date : (CCYY-MM-DD) Effective Dates : 2012-02-22/2013-02-15 Notes : Lightning strike damage 8.2.2 Pressure Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 127302 Data Sampling Interval : 30 sec Accuracy : 0.08 hPa Height Diff to Ant : -0.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2013-06-13/(CCYY-MM-DD) Notes : 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 114958 Data Sampling Interval : 30 sec Accuracy : 0.50 deg Aspiration : UNASPIRATED Height Diff to Ant : -0.514 m Calibration date : (CCYY-MM-DD) Effective Dates : 2012-02-22/2013-02-15 Notes : Lightning strike damage 8.3.2 Temp. Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 127302 Data Sampling Interval : 30 sec Accuracy : 0.50 deg Aspiration : UNASPIRATED Height Diff to Ant : -0.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2013-06-13/(CCYY-MM-DD) Notes : 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.1 Radio Interferences : CELL PHONE ANTENNA Observed Degradations : NONE Effective Dates : 2011-05-12/(CCYY-MM-DD) Additional Information : 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 Canberra ACT 2601 AUSTRALIA Canberra 2601 Australia Primary Contact Contact Name : Geoscience Australia Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 Canberra ACT 2601 AUSTRALIA Canberra 2601 Australia Primary Contact Contact Name : Geoscience Australia Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : http://gnss.vicpos.com.au Secondary Data Center : http://www.gpsnet.com.au URL for More Information : http://gnss.vicpos.com.au/Map/SensorMap.aspx Hardcopy on File Site Map : Y Site Diagram : Y Horizon Mask : Y Monument Description : Y Site Pictures : Y Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra)