MRNO Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : skafatolu Date Prepared : 2024-01-21 Report Type : UPDATE If Update: Previous Site Log : (ssss_ccyymmdd.log) Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Merino Four Character ID : MRNO Monument Inscription : IERS DOMES Number : AUM000189 CDP Number : Monument Description : STEEL MAST Height of the Monument : 2.1 m Monument Foundation : BUILDING ROOF Foundation Depth : Marker Description : Stainless Steel Plate, Threaded SPIGOT Date Installed : 2010-09-14T00:00Z Geologic Characteristic : Bedrock Type : Bedrock Condition : Fracture Spacing : Fault zones nearby : Distance/activity : Additional Information : Merino Community Hall 2. Site Location Information City or Town : Merino State or Province : Victoria Country : Australia Tectonic Plate : AUSTRALIAN Approximate Position (ITRF) X coordinate (m) : -3956092.9861 Y coordinate (m) : 3141326.3523 Z coordinate (m) : -3880933.4357 Latitude (N is +) : -374310.86 Longitude (E is +) : +1413255.50 Elevation (m,ellips.) : 88.0 Additional Information : GDA2020 reg13 coord update 22/01/24 3. GNSS Receiver Information 3.1 Receiver Type : TRIMBLE NETR5 Satellite System : GPS+GLO Serial Number : 4938K63802 Firmware Version : 4.14 Elevation Cutoff Setting : 5 deg Date Installed : 2010-09-14T00:00Z Date Removed : 2014-07-01T00:00Z Temperature Stabiliz. : none Additional Information : edited date removed 3.2 Receiver Type : TRIMBLE NETR5 Satellite System : GPS+GLO Serial Number : 4938K63802 Firmware Version : 4.85/4.18 Elevation Cutoff Setting : 5 deg Date Installed : 2014-07-01T00:00Z Date Removed : 2016-12-28T23:04Z Temperature Stabiliz. : none Additional Information : updated firmware date removed 3.3 Receiver Type : TRIMBLE NETR5 Satellite System : GPS+GLO Serial Number : 4938K63802 Firmware Version : 48.01 Elevation Cutoff Setting : 5 deg Date Installed : 2016-12-28T23:07Z Date Removed : 2019-09-05T04:18Z Temperature Stabiliz. : none Additional Information : Updated FW 3.4 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3051382 Firmware Version : 5.3.0 Elevation Cutoff Setting : 5 deg Date Installed : 2019-09-05T04:18Z Date Removed : 2020-06-16T10:26Z Temperature Stabiliz. : none Additional Information : Receiver Upgraded 3.5 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3051382 Firmware Version : 5.3.2 Elevation Cutoff Setting : 5 deg Date Installed : 2020-06-16T10:26Z Date Removed : 2021-06-09T01:35Z Temperature Stabiliz. : none Additional Information : Firmware Updated 3.6 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3051382 Firmware Version : 5.4.0 Elevation Cutoff Setting : 5 deg Date Installed : 2021-06-09T01:35Z Date Removed : 2022-08-15T00:19Z Temperature Stabiliz. : none Additional Information : FW update 3.7 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3051382 Firmware Version : 5.4.0 Elevation Cutoff Setting : 0 deg Date Installed : 2022-08-15T00:19Z Date Removed : 2022-09-14T20:31Z Temperature Stabiliz. : none Additional Information : Updated elevation cutoff to 0 3.8 Receiver Type : SEPT POLARX5 Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 3051382 Firmware Version : 5.5.0 Elevation Cutoff Setting : 0 deg Date Installed : 2022-09-14T20:31Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : none Additional Information : Updated FW 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : TRM57971.00 NONE Serial Number : 1440925245 Antenna Reference Point : BAM Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Antenna Cable Length : 10.0 m Date Installed : 2010-09-14T00:00Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Dept. of Environment, Land, Water & Planning Preferred Abbreviation : Mailing Address : Level 11, 2 Lonsdale St Melbourne 3000 Australia Primary Contact Contact Name : Hayden Asmussen Telephone (primary) : (03) 9194 0261 Telephone (secondary) : Fax : E-mail : Hayden.Asmussen@delwp.vic.gov.au Secondary Contact Contact Name : GPSnet Support Telephone (primary) : Telephone (secondary) : Fax : E-mail : GPSnet.support@delwp.vic.gov.au Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : Dept. of Environment, Land, Water & Planning Preferred Abbreviation : Mailing Address : Primary Contact Contact Name : Kris Halewood Telephone (primary) : Telephone (secondary) : Fax : E-mail : kris.halewood@delwp.vic.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : http://gnss.vicpos.com.au Secondary Data Center : http://www.gpsnet.com.au URL for More Information : http://gnss.vicpos.com.au/Map/SensorMap.aspx Hardcopy on File Site Map : Y Site Diagram : Y Horizon Mask : Y Monument Description : Y Site Pictures : Y Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra)