MAGC Site Information Form (site log) International GNSS Service See Instructions at: ftp://igscb.jpl.nasa.gov/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : RGP Team Date Prepared : 2023-05-15 Report Type : UPDATE If Update: Previous Site Log : magc_20220509.log Modified/Added Sections : 3.13, 3.14 1. Site Identification of the GNSS Monument Site Name : Mazayes Four Character ID : MAGC Monument Inscription : NONE IERS DOMES Number : 18635M001 CDP Number : NONE Monument Description : ALUMINIUM TRIANGULAR LEVELLING PLATE FIXED ABOVE A CARBON MAST Height of the Monument : Monument Foundation : MASONRY CHIMNEY LINKED TO BEARING WALL Foundation Depth : Marker Description : TOP AND CENTRE OF THE TOP ALUMINIUM PLATE Date Installed : 2016-10-31 Geologic Characteristic : N/A Bedrock Type : N/A Bedrock Condition : N/A Fracture Spacing : N/A Fault zones nearby : N/A Distance/activity : N/A Additional Information : THE ANTENNA ARP IS 138.7 MM ABOVE THE MARKER THIS HEIGHT IS THE SUM OF (FROM BOTTOM TO TOP) A 04.0 MM STAINLESS STEEL WASHER A 76.3 MM STAINLESS STEEL EXTENSION A 58.4 MM 360° PRISM (360°Mini Prism System MPS107) PRISM OFFSET IS 009.4 MM PRISM CENTER IS 017.3 MM BELOW THE ANTENNA ARP PRISM CENTER IS 121.4 MM ABOVE THE MARKER 2. Site Location Information City or Town : Mazayes State or Province : Puy-de-Dome (63) Country : France Tectonic Plate : Eurasia Approximate Position (ITRF) X coordinate (m) : 4449946 Y coordinate (m) : 224258 Z coordinate (m) : 4549707 Latitude (N is +) : +454727.995 Longitude (E is +) : +0025306.055 Elevation (m,ellips.) : 861.8 Additional Information : (multiple lines) 3. GNSS Receiver Information 3.1 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+SBAS Serial Number : 1103400943 Firmware Version : 5.11 Elevation Cutoff Setting : 0 Date Installed : 2016-10-31T12:00Z Date Removed : 2017-01-05T12:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Enabled SBAS L5 : Enabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Enabled Data + Pilot Signal Tracking BW : Narrow 3.2 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL+SBAS Serial Number : 1103400943 Firmware Version : 5.11 Elevation Cutoff Setting : 0 Date Installed : 2017-01-05T12:00Z Date Removed : 2017-01-08T12:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Enabled SBAS L5 : Enabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Enabled Data + Pilot GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.3 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL+SBAS Serial Number : 1103400943 Firmware Version : 5.20 Elevation Cutoff Setting : 0 Date Installed : 2017-01-08T12:00Z Date Removed : 2017-01-28T12:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Enabled SBAS L5 : Enabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Enabled Data + Pilot GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.4 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL Serial Number : 1103400943 Firmware Version : 5.20 Elevation Cutoff Setting : 0 Date Installed : 2017-01-28T12:00Z Date Removed : 2017-06-01T12:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.5 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL Serial Number : 1103400943 Firmware Version : 5.21 Elevation Cutoff Setting : 0 Date Installed : 2017-06-01T12:00Z Date Removed : 2018-06-08T14:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.6 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL Serial Number : 1103400943 Firmware Version : 5.34 Elevation Cutoff Setting : 0 Date Installed : 2018-06-08T14:00Z Date Removed : 2018-06-25T14:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.7 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL Serial Number : 1103400943 Firmware Version : 5.36 Elevation Cutoff Setting : 0 Date Installed : 2018-06-25T14:00Z Date Removed : 2018-10-16T08:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.8 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL Serial Number : 1103400943 Firmware Version : 5.43 Elevation Cutoff Setting : 0 Date Installed : 2018-10-16T08:00Z Date Removed : 2020-03-31T09:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.9 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL Serial Number : 1103400943 Firmware Version : 5.45 Elevation Cutoff Setting : 0 Date Installed : 2020-03-31T09:00Z Date Removed : 2020-10-22T00:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.10 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL+GAL+BDS+SBAS Serial Number : 1103400943 Firmware Version : 5.48 Elevation Cutoff Setting : 0 Date Installed : 2020-10-22T00:00Z Date Removed : 2021-07-02T00:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.11 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL+GAL+BDS+SBAS Serial Number : 1103400943 Firmware Version : 5.50 Elevation Cutoff Setting : 0 Date Installed : 2021-07-02T00:00Z Date Removed : 2021-12-31T00:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.12 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL+GAL+BDS+SBAS Serial Number : 1103400943 Firmware Version : 5.53 Elevation Cutoff Setting : 0 Date Installed : 2021-07-02T00:00Z Date Removed : 2022-05-09T06:00Z Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.13 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL+GAL+BDS+SBAS Serial Number : 1103400943 Firmware Version : 5.54 Elevation Cutoff Setting : 0 Date Installed : 2022-05-09T06:00Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.14 Receiver Type : TRIMBLE BD970 Satellite System : GPS+GLO+GAL+GAL+BDS+SBAS Serial Number : 1103400943 Firmware Version : 5.60 Elevation Cutoff Setting : 0 Date Installed : 2023-03-27T18:30Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : Indoor office ambiant temperature Additional Information : MAXWELL-6 CHIP * Firmware settings Everest (TM) : Disabled Clock steering : Enabled GPS L1 - C/A : Enabled GPS L2E : Enabled L2C and L2E GPS L2C : Enabled CM + CL GPS L5 : Enabled I + Q SBAS L1 - C/A : Disabled SBAS L5 : Disabled GLONASS L1 - C/A : Enabled GLONASS L1P : Enabled GLONASS L2 - C/A : Enabled L2 - C/A(M) and P GLONASS L3 : Disabled GALILEO E1 : Enabled GALILEO E5-A : Enabled GALILEO E5-B : Enabled GALILEO E5-AltBOC : Enabled Signal Tracking BW : Narrow 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+CMP+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (deg C) +/- (deg C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : TRM57971.00 NONE Serial Number : 7000112368 Antenna Reference Point : BAM Marker->ARP Up Ecc. (m) : 000.1387 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 Antenna Radome Type : NONE Radome Serial Number : N/A Antenna Cable Type : TIMES MICROWAVE LMR600 Antenna Cable Length (m) : 24 Date Installed : 2016-10-25 Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : RF line details from antenna to receiver is as follow : * HARDWARE : 3 m LMR600 (TNC male to TNC male) POLYPHASER DGXZ+15TFTF-A (lightning protection at building entry point) 20 m LMR 600 (TNC male to TNC male) POLYPHASER DGXZ+15TFTF-A (lightning protection at equipement entry point) TNC to TNC gender changer In port of GPSSOURCE 2 ways splitter PN: S12-E-TF 1 m LMR 600 (TNC male to TNC male) on PASS DC Port (Out #1) of splitter (S12-E-TF Splitter is the passive EMI shielded version) * LOSSES (from specs, not actual measurements) : Total cable loss (including plugs) is 3.6 dB@1575.25 MHz 3.2 dB@1227.60 MHz Each Polyphaser is < 0.1 dB loss S12 Splitter is 4.5 dB loss (typical) Total losses : 8.3 dB@1575.25 MHz 7.9 dB@1227.60 MHz 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : (if external) Effective Dates : 2016-10-31 Notes : (multiple lines) 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.1 Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.1 Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.1 Other Instrumentation : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.1 Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.1 Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.1 Signal Obstructions : (TREES/BUILDLINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDLINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.1 Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Mathieu Peyréga Preferred Abbreviation : M. Mailing Address : Village Le Grand Chambois 63230 Mazayes FRANCE Primary Contact Contact Name : Mathieu Peyréga Telephone (primary) : 00 33 (0)6 87 30 83 59 Telephone (secondary) : N/A Fax : N/A E-mail : mathieu.peyrega@gmail.com Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : Institut Geographique National Preferred Abbreviation : IGN Mailing Address : 73 avenue de Paris : 94165 Saint-Mande CEDEX France Primary Contact Contact Name : RGP Team Telephone (primary) : 00 33 (0)1 43 98 83 39 Telephone (secondary) : Fax : 00 33 (0)1 43 98 84 50 E-mail : rgpadmin@ign.fr Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : IGN / Saint-Mande Secondary Data Center : IGN / Marne la Vallee URL for More Information : http://rgp.ign.fr Hardcopy on File Site Map : http://rgp.ign.fr Site Diagram : (Y) Horizon Mask : (Y) Monument Description : (Y) Site Pictures : (Y) Additional Information : (multiple lines) Antenna Graphics with Dimensions TRM57971.00 / ----------------------+--------------------- \ <-- L1 + + + <-- L2 \ -------------------------------------------- / \ / \ / \-----+-----/ <-- 0.0000 ARP=BAM <-- 0.3396 --> L1 : L1 Phase Center L2 : L2 Phase Center BAM: Bottom of antenna mount ARP : Antenna Reference Point