JOUX Site Information Form (site log) International GPS Service See Instructions at: ftp://igscb.jpl.nasa.gov/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Raphaël MELIOR Date Prepared : 2023-04-18 Report Type : UPDATE If Update: Previous Site Log : joux_20210823.log Modified/Added Sections : 3.6, 3.7 1. Site Identification of the GNSS Monument Site Name : Châtel de Joux Four Character ID : JOUX Monument Inscription : NONE IERS DOMES Number : 19949M001 CDP Number : Monument Description : (PILLAR/BRASS PLATE/STEEL MAST/etc) Height of the Monument : (m) Monument Foundation : (STEEL RODS, CONCRETE BLOCK, ROOF, etc) Foundation Depth : (m) Marker Description : (CHISELLED CROSS/DIVOT/BRASS NAIL/etc) Date Installed : 2000-04-19T00:00Z Geologic Characteristic : BEDROCK Bedrock Type : SEDIMENTARY Bedrock Condition : FRESH Fracture Spacing : Fault zones nearby : NO Distance/activity : (multiple lines) Additional Information : Antenna is fixed on top of 1.5 m high concrete : directly anchored into bedrock 2. Site Location Information City or Town : Chatel-de-Joux State or Province : JURA Country : France Tectonic Plate : EURASIAN Approximate Position (ITRF) X coordinate (m) : 4373976.918 Y coordinate (m) : 443957.299 Z coordinate (m) : 4606479.658 Latitude (N is +) : +463142.85709 Longitude (E is +) : +0054744.36004 Elevation (m,ellips.) : 845.500 Additional Information : Coordinates previously given was : Additional Information : X = 4373990.4078m, Y = 443982.9101m, Z = 4606495.5417 Additional Information : lat = +463143.26, lon = +0054745.01, elev = 878.9 Additional Information : The new position was updated according to new RGF93 but it is the same physical point. Additional Information : The new position was configured in the receiver 2021-08-23 at 07:32 UTC. 3. GNSS Receiver Information 3.1 Receiver Type : ASHTECH Z-XII3 Satellite System : GPS Serial Number : LP019995004 Firmware Version : CD00-D02 Elevation Cutoff Setting : 0 Date Installed : 2000-04-19T00:00Z Date Removed : 2000-08-30T00:00Z Temperature Stabiliz. : none Additional Information : Receiver failure 3.2 Receiver Type : ASHTECH Z-XII3 Satellite System : GPS Serial Number : LP03329 Firmware Version : CB00-1D02 Elevation Cutoff Setting : 0 Date Installed : 2000-08-30T00:00Z Date Removed : 2013-04-26T13:00Z Temperature Stabiliz. : none Additional Information : Recepteur HS (?) 3.3 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+SBAS Serial Number : 5046K71708 Firmware Version : 4.70 Elevation Cutoff Setting : 0 Date Installed : 2013-07-17T09:00Z Date Removed : 2015-11-05T12:18Z Temperature Stabiliz. : none Additional Information : (multiple lines) 3.4 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+SBAS Serial Number : 5046K71708 Firmware Version : 4.70 Elevation Cutoff Setting : 0 Date Installed : 2015-11-05T12:18Z Date Removed : 2015-11-09T12:26Z Temperature Stabiliz. : none Additional Information : Add "Galileo" and "L5" options but Galileo not tracked yet. 3.5 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+SBAS Serial Number : 5046K71708 Firmware Version : 4.70 Elevation Cutoff Setting : 0 Date Installed : 2015-11-09T12:26Z Date Removed : 2023-04-17T10:49Z Temperature Stabiliz. : none Additional Information : I don't have to enable SBAS because abnormally it was enabled before. 3.6 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+SBAS Serial Number : 5046K71708 Firmware Version : 5.45 Elevation Cutoff Setting : 0 Date Installed : 2023-04-17T10:49Z Date Removed : 2023-04-18T09:19Z Temperature Stabiliz. : none Additional Information : (multiple lines) 3.7 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+SBAS Serial Number : 5046K71708 Firmware Version : 5.45 Elevation Cutoff Setting : 0 Date Installed : 2023-04-18T09:19Z Date Removed : CCYY-MM-DDThh:mmZ Temperature Stabiliz. : none Additional Information : Option Trimble Everest was disabled. No other changes. 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS/GLONASS/GPS+GLONASS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : ASH701945C_M NONE Serial Number : 19995005 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : 2000-04-19T00:00Z Date Removed : 2017-03-31T09:38Z Additional Information : (multiple lines) 4.2 Antenna Type : TRM57971.00 NONE Serial Number : 3123170497 Antenna Reference Point : BAM Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Unknown but unchanged since last antenna except addition of Amphenol RF 242131 adapter Antenna Cable Length : Date Installed : 2017-03-31T12:49Z Date Removed : CCYY-MM-DDThh:mmZ Additional Information : During installation the antenna has been first incorrectly installed and then installed with the correct support. Don't try to use data between 09:38 and 12:49. Antenna Cable Length is unknown, Amphenol adapter add approx. 2 to 3 cm of cable length. 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : (if external) Effective Dates : 2000-04-19/CCYY-MM-DD Notes : (multiple lines) 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.1 Other Instrumentation : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDLINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Observatoire de Besançon Preferred Abbreviation : OSU THETA Mailing Address : 41B Avenue de l Observatoire : 25000 Besancon - FRANCE Primary Contact Contact Name : Mr. Chrisitian Sue Telephone (primary) : +33 3 81 66 61 23 Telephone (secondary) : Fax : E-mail : csue@univ-fcomte.fr Secondary Contact Contact Name : Mr. Pierre Sakic Telephone (primary) : Telephone (secondary) : Fax : E-mail : pierre.sakic@gfz-potsdam.de Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : (multiple lines) Preferred Abbreviation : (A10) Mailing Address : (multiple lines) Primary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : RENAG Secondary Data Center : OSU-THETA URL for More Information : http://webrenag.unice.fr/ Hardcopy on File Site Map : (Y or URL) Site Diagram : (Y or URL) Horizon Mask : (Y or URL) Monument Description : (Y or URL) Site Pictures : (Y or URL) Additional Information : (multiple lines) Antenna Graphics with Dimensions (insert text graphic from file antenna.gra) / --------------------------------------------- \ + + \ --------------------------------------------- / \ / \ +-+ / \====| |====/ <-- 0.0000 BAM=ARP | || || | rotation lock --> O==>) (| | | +=====+ | | | | +-+ | +----------------+====| |====+-----------------+ <-- -0.050 | triangular aluminum plate | +------+-------| |-----------------------------| |----+----+ | top of pillar | <------------------ 0.381 ---------------------> ARP: Antenna Reference Point BPA: Bottom of Preamplifier