GUST00USA Site Information Form
     OHDT Continuously Operating Reference Station
     See Instructions at:
       https://files.igs.org/pub/station/general/sitelog_instr.txt

0.   Form

     Prepared by (full name)  : Dave J. Beiter
     Date Prepared            : 2024-02-27
     Report Type              : UPDATE
     If Update:
      Previous Site Log       : gust_20230829.log
      Modified/Added Sections : 3.14


1.   Site Identification of the GNSS Monument

     Site Name                : Gustavus
     Four Character ID        : GUST
     Monument Inscription     :
     IERS DOMES Number        : 49632S001
     CDP Number               : (A4)
     Monument Description     : PILLAR
       Height of the Monument : (m)
       Monument Foundation    : CONCRETE
       Foundation Depth       : 4.1 m
     Marker Description       : (CHISELLED CROSS/DIVOT/BRASS NAIL/etc)
     Date Installed           : 2001-12-17T00:00Z
     Geologic Characteristic  : (BEDROCK/CLAY/CONGLOMERATE/GRAVEL/SAND/etc)
       Bedrock Type           : (IGNEOUS/METAMORPHIC/SEDIMENTARY)
       Bedrock Condition      : (FRESH/JOINTED/WEATHERED)
       Fracture Spacing       : (1-10 cm/11-50 cm/51-200 cm/over 200 cm)
       Fault zones nearby     : (YES/NO/Name of the zone)
         Distance/activity    : (multiple lines)
     Additional Information   : (multiple lines)


2.   Site Location Information

     City or Town             : Gustavus
     State or Province        : Ohio
     Country                  : United States
     Tectonic Plate           : North American
     Approximate Position (ITRF)
       X coordinate (m)       : 772251.571
       Y coordinate (m)       : -4724227.243
       Z coordinate (m)       : 4201259.674
       Latitude (N is +)      : +412745.90
       Longitude (E is +)     : -0804258.27
       Elevation (m,ellips.)  : 282.0
     Additional Information   : ARP IGS08 POSITION (EPOCH 2005.00)
                              : Computed in Aug 2011 using data through gpswk
                              : 1631.


3.   GNSS Receiver Information

3.1  Receiver Type            : TRIMBLE 5700
     Satellite System         : GPS
     Serial Number            : 0440101291
     Firmware Version         : 1.04
     Elevation Cutoff Setting : (deg)
     Date Installed           : 2001-12-17
     Date Removed             : 2004-05-18
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : (multiple lines)

3.2  Receiver Type            : TRIMBLE NETRS
     Satellite System         : GPS
     Serial Number            : 4350230204
     Firmware Version         : 1.0-3
     Elevation Cutoff Setting : (deg)
     Date Installed           : 2004-05-18
     Date Removed             : 2005-07-26
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : Firmware upgraded.

3.3  Receiver Type            : TRIMBLE NETRS
     Satellite System         : GPS
     Serial Number            : 4350230204
     Firmware Version         : 1.11
     Elevation Cutoff Setting : (deg)
     Date Installed           : 2005-07-26
     Date Removed             : 2009-10-13
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : New firmware installed.

3.4  Receiver Type            : TRIMBLE NETR5
     Satellite System         : GPS+GLO
     Serial Number            : 4934K63377
     Firmware Version         : 4.03
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2009-10-13
     Date Removed             : 2020-01-28T16:10Z
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : New receiver installed.

3.5  Receiver Type            : TRIMBLE ALLOY
     Satellite System         : GPS+GLO+GAL
     Serial Number            : 5945R40139
     Firmware Version         : 5.43
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2020-01-28T16:10Z
     Date Removed             : 2020-05-29T12:22Z
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : Firmware update 

3.6  Receiver Type            : TRIMBLE ALLOY
     Satellite System         : GPS+GLO+GAL+BDS+QZSS+SBAS
     Serial Number            : 5945R40139
     Firmware Version         : 5.45
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2020-05-29T12:22Z
     Date Removed             : 2021-04-19
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : new firmware

3.7  Receiver Type            : TRIMBLE ALLOY
     Satellite System         : GPS+GLO+GAL+BDS+QZSS+SBAS
     Serial Number            : 5945R40139
     Firmware Version         : 6.10
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2021-04-19
     Date Removed             : 2021-09-16T12:00Z
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : new firmware

3.8  Receiver Type            : TRIMBLE ALLOY
     Satellite System         : GPS+GLO+GAL+BDS+QZSS+SBAS
     Serial Number            : 5945R40139
     Firmware Version         : 6.12
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2021-09-16T12:00Z
     Date Removed             : 2022-02-03
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : new firmware

3.9  Receiver Type            : TRIMBLE ALLOY
     Satellite System         : GPS+GLO+GAL+BDS+QZSS+SBAS
     Serial Number            : 5945R40139
     Firmware Version         : 6.14/5.54
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2022-02-03
     Date Removed             : 2022-07-26T11:48Z
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : new firmware

3.10 Receiver Type            : TRIMBLE ALLOY
     Satellite System         : GPS+GLO+GAL+BDS+QZSS+SBAS
     Serial Number            : 5945R40139
     Firmware Version         : 6.15
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2022-07-26T11:48Z
     Date Removed             : 2023-01-05T12:42Z
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : new firmware

3.11 Receiver Type            : TRIMBLE ALLOY
     Satellite System         : GPS+GLO+GAL+BDS+QZSS+SBAS
     Serial Number            : 5945R40139
     Firmware Version         : 6.16/5.56
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2023-01-05T12:42Z
     Date Removed             : 2023-05-09T12:00Z
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : new firmware

3.12 Receiver Type            : TRIMBLE ALLOY
     Satellite System         : GPS+GLO+GAL+BDS+QZSS+SBAS
     Serial Number            : 5945R40139
     Firmware Version         : 6.20/5.60
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2023-05-09T12:00Z
     Date Removed             : 2023-08-29T17:00Z 
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : new firmware

3.13 Receiver Type            : TRIMBLE ALLOY
     Satellite System         : GPS+GLO+GAL+BDS+QZSS+SBAS
     Serial Number            : 5945R40139
     Firmware Version         : 6.21/5.61
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2023-08-29T17:15Z 
     Date Removed             : 2024-02-27T12:20Z
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : (multiple lines)

3.14 Receiver Type            : TRIMBLE ALLOY
     Satellite System         : GPS+GLO+GAL+BDS+QZSS+SBAS
     Serial Number            : 5945R40139
     Firmware Version         : 6.23/5.63
     Elevation Cutoff Setting : 5 deg
     Date Installed           : 2024-02-27T12:20Z
     Date Removed             : (CCYY-MM-DDThh:mmZ)
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : new firmware

3.x  Receiver Type            : (A20, from rcvr_ant.tab; see instructions)
     Satellite System         : (GPS+GLO+GAL+BDS+QZSS+SBAS)
     Serial Number            : (A20, but note the first A5 is used in SINEX)
     Firmware Version         : (A11)
     Elevation Cutoff Setting : (deg)
     Date Installed           : (CCYY-MM-DDThh:mmZ)
     Date Removed             : (CCYY-MM-DDThh:mmZ)
     Temperature Stabiliz.    : (none or tolerance in degrees C)
     Additional Information   : (multiple lines)


4.   GNSS Antenna Information

4.1  Antenna Type             : TRM29659.00     UNAV
     Serial Number            : 0220256860
     Antenna Reference Point  : BPA
     Marker->ARP Up Ecc. (m)  : 0.0000
     Marker->ARP North Ecc(m) : 0.0000
     Marker->ARP East Ecc(m)  : 0.0000
     Alignment from True N    : 0 deg
     Antenna Radome Type      : UNAV
     Radome Serial Number     : (A4 from rcvr_ant.tab; see instructions)
     Antenna Cable Type       : (vendor & type number)
     Antenna Cable Length     : (m)
     Date Installed           : 2001-12-17
     Date Removed             : 2012-08-08
     Additional Information   : On 2003/12/16 added the radome
                              : type information and modified
                              : ARP to BPA. The radome was installed
                              : at the same time as the antenna.

4.2  Antenna Type             : TRM59800.00     NONE
     Serial Number            : 0220294892
     Antenna Reference Point  : BPA
     Marker->ARP Up Ecc. (m)  : 0.0000
     Marker->ARP North Ecc(m) : 0.0000
     Marker->ARP East Ecc(m)  : 0.0000
     Alignment from True N    : 0 deg
     Antenna Radome Type      : NONE
     Radome Serial Number     :
     Antenna Cable Type       : Times Microwave LMR400
     Antenna Cable Length     : 42M
     Date Installed           : 2012-08-08
     Date Removed             : 2012-10-25
     Additional Information   : Radome added 10-25-2012

4.3  Antenna Type             : TRM59800.00     SCIS
     Serial Number            : 0220294892
     Antenna Reference Point  : BPA
     Marker->ARP Up Ecc. (m)  : 0.0000
     Marker->ARP North Ecc(m) : 0.0000
     Marker->ARP East Ecc(m)  : 0.0000
     Alignment from True N    : 0 deg
     Antenna Radome Type      : SCIS
     Radome Serial Number     : 1346
     Antenna Cable Type       : Times Microwave LMR400
     Antenna Cable Length     : 42 m
     Date Installed           : 2012-10-25
     Date Removed             : 2022-04-20T10:35Z
     Additional Information   : (multiple lines)

4.4  Antenna Type             : TRM59800.00     SCIS
     Serial Number            : 0220335598
     Antenna Reference Point  : BPA
     Marker->ARP Up Ecc. (m)  : 0.0000
     Marker->ARP North Ecc(m) : 0.0000
     Marker->ARP East Ecc(m)  : 0.0000
     Alignment from True N    : 0 deg
     Antenna Radome Type      : SCIS
     Radome Serial Number     : 1346
     Antenna Cable Type       : Times Microwave LMR400
     Antenna Cable Length     : 42 m
     Date Installed           : 2022-04-25T14:43Z
     Date Removed             : 2022-12-06T17:25Z
     Additional Information   : new antenna

4.5  Antenna Type             : TRM159900.00    SCIS
     Serial Number            : 6244333667
     Antenna Reference Point  : BPA
     Marker->ARP Up Ecc. (m)  : 0.0000
     Marker->ARP North Ecc(m) : 0.0000
     Marker->ARP East Ecc(m)  : 0.0000
     Alignment from True N    : 0 deg
     Antenna Radome Type      : SCIS
     Radome Serial Number     : 1346
     Antenna Cable Type       : Times Microwave LMR400
     Antenna Cable Length     : 42 m
     Date Installed           : 2022-12-06T17:25Z
     Date Removed             : (CCYY-MM-DDThh:mmZ)
     Additional Information   : (multiple lines)

4.x  Antenna Type             : (A20, from rcvr_ant.tab; see instructions)
     Serial Number            : (A*, but note the first A5 is used in SINEX)
     Antenna Reference Point  : (BPA/BCR/XXX from "antenna.gra"; see instr.)
     Marker->ARP Up Ecc. (m)  : (F8.4)
     Marker->ARP North Ecc(m) : (F8.4)
     Marker->ARP East Ecc(m)  : (F8.4)
     Alignment from True N    : (deg; + is clockwise/east)
     Antenna Radome Type      : (A4 from rcvr_ant.tab; see instructions)
     Radome Serial Number     :
     Antenna Cable Type       : (vendor & type number)
     Antenna Cable Length     : (m)
     Date Installed           : (CCYY-MM-DDThh:mmZ)
     Date Removed             : (CCYY-MM-DDThh:mmZ)
     Additional Information   : (multiple lines)


5.   Surveyed Local Ties

5.x  Tied Marker Name         :
     Tied Marker Usage        : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
     Tied Marker CDP Number   : (A4)
     Tied Marker DOMES Number : (A9)
     Differential Components from GNSS Marker to the tied monument (ITRS)
       dx (m)                 : (m)
       dy (m)                 : (m)
       dz (m)                 : (m)
     Accuracy (mm)            : (mm)
     Survey method            : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
     Date Measured            : (CCYY-MM-DDThh:mmZ)
     Additional Information   : (multiple lines)


6.   Frequency Standard

6.1  Standard Type            : INTERNAL
       Input Frequency        : (if external)
       Effective Dates        : 2001-12-17/CCYY-MM-DD
       Notes                  : (multiple lines)

6.x  Standard Type            : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
       Input Frequency        : (if external)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)


7.   Collocation Information

7.x  Instrumentation Type     : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
       Status                 : (PERMANENT/MOBILE)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)


8.   Meteorological Instrumentation

8.1.x Humidity Sensor Model   :
       Manufacturer           :
       Serial Number          :
       Data Sampling Interval : (sec)
       Accuracy (% rel h)     : (% rel h)
       Aspiration             : (UNASPIRATED/NATURAL/FAN/etc)
       Height Diff to Ant     : (m)
       Calibration date       : (CCYY-MM-DD)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)

8.2.x Pressure Sensor Model   :
       Manufacturer           :
       Serial Number          :
       Data Sampling Interval : (sec)
       Accuracy               : (hPa)
       Height Diff to Ant     : (m)
       Calibration date       : (CCYY-MM-DD)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)

8.3.x Temp. Sensor Model      :
       Manufacturer           :
       Serial Number          :
       Data Sampling Interval : (sec)
       Accuracy               : (deg C)
       Aspiration             : (UNASPIRATED/NATURAL/FAN/etc)
       Height Diff to Ant     : (m)
       Calibration date       : (CCYY-MM-DD)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)

8.4.x Water Vapor Radiometer  :
       Manufacturer           :
       Serial Number          :
       Distance to Antenna    : (m)
       Height Diff to Ant     : (m)
       Calibration date       : (CCYY-MM-DD)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Notes                  : (multiple lines)

8.5.x Other Instrumentation   : (multiple lines)


9.   Local Ongoing Conditions Possibly Affecting Computed Position

9.1.x Radio Interference      : (TV/CELL PHONE ANTENNA/RADAR/etc)
       Observed Degradations  : (SN RATIO/DATA GAPS/etc)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Additional Information : (multiple lines)

9.2.x Multipath Sources       : (METAL ROOF/DOME/VLBI ANTENNA/etc)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Additional Information : (multiple lines)

9.3.x Signal Obstructions     : (TREES/BUILDLINGS/etc)
       Effective Dates        : (CCYY-MM-DD/CCYY-MM-DD)
       Additional Information : (multiple lines)


10.  Local Episodic Effects Possibly Affecting Data Quality

10.x Date                     : (CCYY-MM-DD/CCYY-MM-DD)
     Event                    : (TREE CLEARING/CONSTRUCTION/etc)


11.  On-Site, Point of Contact Agency Information

     Agency                   : Ohio Department of Transportation
     Preferred Abbreviation   : OHDT
     Mailing Address          : Office of CADD and Mapping Services
                              : 1980 W. Broad Street
                              : Columbus, Ohio 43223
     Primary Contact
       Contact Name           : David Beiter
       Telephone (primary)    : 614-275-1372
       Telephone (secondary)  :
       Fax                    : 614-275-1673
       E-mail                 : dave.beiter@dot.state.oh.us
     Secondary Contact
       Contact Name           :
       Telephone (primary)    :
       Telephone (secondary)  :
       Fax                    :
       E-mail                 :
     Additional Information   : (multiple lines)


12.  Responsible Agency (if different from 11.)

     Agency                   : (multiple lines)
     Preferred Abbreviation   : (A10)
     Mailing Address          : (multiple lines)
     Primary Contact
       Contact Name           :
       Telephone (primary)    :
       Telephone (secondary)  :
       Fax                    :
       E-mail                 :
     Secondary Contact
       Contact Name           :
       Telephone (primary)    :
       Telephone (secondary)  :
       Fax                    :
       E-mail                 :
     Additional Information   : (multiple lines)


13.  More Information

     Primary Data Center      : https://geodesy.noaa.gov/corsdata/
     Secondary Data Center    : 
     URL for More Information : https://geodesy.noaa.gov/CORS/
     Hardcopy on File
       Site Map               : (Y or URL)
       Site Diagram           : (Y or URL)
       Horizon Mask           : (Y or URL)
       Monument Description   : (Y or URL)
       Site Pictures          : (Y or URL)
     Additional Information   : (multiple lines)
     Antenna Graphics with Dimensions
       https://files.igs.org/pub/station/general/antenna.gra