BKNL Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : rudemans Date Prepared : 2023-11-28 Report Type : UPDATE If Update: Previous Site Log : (ssss_ccyymmdd.log) Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Broken Hill Four Character ID : BKNL Monument Inscription : Broken Hill CORS IERS DOMES Number : 59951M001 CDP Number : Monument Description : Concrete pillar/stainless steel plate Height of the Monument : 1.5 m Monument Foundation : Bedrock Foundation Depth : 0.7 m Marker Description : Intersection of plate with spigot Date Installed : 2011-09-01T00:00Z Geologic Characteristic : BEDROCK/GNEISS Bedrock Type : IGNEOUS Bedrock Condition : FRESH Fracture Spacing : Fault zones nearby : NO Distance/activity : Additional Information : TS 12144 (SCIMS Number) 2. Site Location Information City or Town : Broken Hill State or Province : New South Wales Country : Australia Tectonic Plate : AUSTRALIAN Approximate Position (ITRF) X coordinate (m) : -4235701.4569 Y coordinate (m) : 3372839.2021 Z coordinate (m) : -3360245.2564 Latitude (N is +) : -315946.64 Longitude (E is +) : +1412812.37 Elevation (m,ellips.) : 307.4 Additional Information : GDA94 coordinates (Reg 13) 3. GNSS Receiver Information 3.1 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5048K72025 Firmware Version : 4.42 Elevation Cutoff Setting : 0 deg Date Installed : 2011-09-01T00:00Z Date Removed : 2012-05-25T02:00Z Temperature Stabiliz. : none Additional Information : Ti-1 3.2 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO Serial Number : 5048K72025 Firmware Version : 4.48 Elevation Cutoff Setting : 0 deg Date Installed : 2012-05-25T02:00Z Date Removed : 2015-01-22T05:15Z Temperature Stabiliz. : none Additional Information : Ti-1 3.3 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+BDS Serial Number : 5048K72025 Firmware Version : 4.93 Elevation Cutoff Setting : 0 deg Date Installed : 2015-01-22T05:15Z Date Removed : 2015-06-20T21:00Z Temperature Stabiliz. : none Additional Information : Ti-1 3.4 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+BDS+QZSS+SBAS Serial Number : 5048K72025 Firmware Version : 5.01 Elevation Cutoff Setting : 0 deg Date Installed : 2015-06-20T21:00Z Date Removed : 2016-12-20T11:31Z Temperature Stabiliz. : none Additional Information : Ti-1 3.5 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+BDS+QZSS+SBAS Serial Number : 5048K72025 Firmware Version : 5.15 Elevation Cutoff Setting : 0 deg Date Installed : 2016-12-20T11:31Z Date Removed : 2017-09-19T05:35Z Temperature Stabiliz. : none Additional Information : Ti-1 3.6 Receiver Type : TRIMBLE NETR9 Satellite System : GPS+GLO+GAL+BDS+QZSS+SBAS Serial Number : 5048K72025 Firmware Version : 5.22,20/MAR/2017 Elevation Cutoff Setting : 0 deg Date Installed : 2017-09-19T05:35Z Date Removed : 2020-12-02T04:30Z Temperature Stabiliz. : none Additional Information : Ti-1 3.7 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5921R40195 Firmware Version : 5.45 Elevation Cutoff Setting : 0 deg Date Installed : 2020-12-02T04:30Z Date Removed : 2022-10-31T02:48Z Temperature Stabiliz. : 0.0 Additional Information : Installed new Tier 3 station using existing : antenna. 3.8 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5921R40195 Firmware Version : 6.15 Elevation Cutoff Setting : 0 deg Date Installed : 2022-10-31T02:48Z Date Removed : 2023-11-28T03:37Z Temperature Stabiliz. : 0.0 Additional Information : Firmware update only 3.9 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 5921R40195 Firmware Version : 6.21 Elevation Cutoff Setting : 0 deg Date Installed : 2023-11-28T03:37Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : 0.0 Additional Information : Firmware update only. 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : TRM59800.00 SCIS Serial Number : 5115354136 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : SCIS Radome Serial Number : 0989 Antenna Cable Type : LMR400 / LMR400 / LMR400 Antenna Cable Length : 43.8 m Date Installed : 2011-09-01T00:00Z Date Removed : 2016-09-05T23:00Z Additional Information : Surge Protection (Times Microwave TC-LP-GTRNFF) : installed at receiver end between 0.8 m and 42.3 : m leads. Antenna cable length split into three : sections from antenna to receiver: 0.7 m / 42.3 : m / 0.8 m. 4.2 Antenna Type : TRM59800.00 SCIS Serial Number : 5220354477 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : SCIS Radome Serial Number : 0989 Antenna Cable Type : LMR400 / LMR400 / LMR400 Antenna Cable Length : 43.8 m Date Installed : 2016-09-05T23:00Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : Surge Protection (Times Microwave TC-LP-GTRNFF) : installed at receiver end between 0.8 m and 42.3 : m leads. Antenna cable length split into three : sections from antenna to receiver: 0.7 m / 42.3 : m / 0.8 m. 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : INTERNAL Input Frequency : Effective Dates : (CCYY-MM-DD)/(CCYY-MM-DD) Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : PAROSCIENTIFIC Serial Number : 114867 Data Sampling Interval : 30 sec Accuracy (% rel h) : 2.00 Aspiration : UNASPIRATED Height Diff to Ant : 0.99 m Calibration date : (CCYY-MM-DD) Effective Dates : 2011-09-01/2020-12-01 Notes : 8.1.2 Humidity Sensor Model : WXT530 Manufacturer : Vaisala Serial Number : R2330504 Data Sampling Interval : Accuracy (% rel h) : 3.00 Aspiration : Height Diff to Ant : 1.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2020-12-01/(CCYY-MM-DD) Notes : 1.5m standard design offset, instrument is 3m : above ground level 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : PAROSCIENTIFIC Serial Number : 114867 Data Sampling Interval : 30 sec Accuracy : 0.08 hPa Height Diff to Ant : 0.99 m Calibration date : (CCYY-MM-DD) Effective Dates : 2011-09-01/2020-12-01 Notes : 8.2.2 Pressure Sensor Model : WXT530 Manufacturer : Vaisala Serial Number : R2330504 Data Sampling Interval : Accuracy : 0.50 hPa Height Diff to Ant : 1.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2020-12-01/(CCYY-MM-DD) Notes : 1.5m standard design offset, instrument is 3m : above ground level 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : PAROSCIENTIFIC Serial Number : 114867 Data Sampling Interval : 30 sec Accuracy : 0.50 deg Aspiration : UNASPIRATED Height Diff to Ant : 0.99 m Calibration date : (CCYY-MM-DD) Effective Dates : 2011-09-01/2020-12-01 Notes : 8.3.2 Temp. Sensor Model : WXT530 Manufacturer : Vaisala Serial Number : R2330504 Data Sampling Interval : Accuracy : 0.30 deg Aspiration : Height Diff to Ant : 1.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2020-12-01/(CCYY-MM-DD) Notes : 1.5m standard design offset, instrument is 3m : above ground level 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 Canberra ACT 2601 AUSTRALIA Canberra 2601 Australia Primary Contact Contact Name : Geoscience Australia Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : GPO Box 378 Canberra ACT 2601 AUSTRALIA Canberra 2601 Australia Primary Contact Contact Name : Geoscience Australia Telephone (primary) : +61 2 6249 9004 Telephone (secondary) : +61 2 6249 9111 Fax : E-mail : gnss@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : Geoscience Australia (ftp://ftp.ga.gov.au) Secondary Data Center : CORSnet-NSW (http://www.corsnet.com.au) URL for More Information : Hardcopy on File Site Map : Site Diagram : Horizon Mask : Monument Description : Site Pictures : Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra)