BDLE Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : rudemans Date Prepared : 2023-11-28 Report Type : UPDATE If Update: Previous Site Log : (ssss_ccyymmdd.log) Modified/Added Sections : (n.n,n.n,...) 1. Site Identification of the GNSS Monument Site Name : Bairnsdale Four Character ID : BDLE Monument Inscription : IERS DOMES Number : 50196M001 CDP Number : Monument Description : Concrete pillar/stainless steel plate Height of the Monument : 1.5 m Monument Foundation : Bedrock Foundation Depth : 0.5 m Marker Description : Intersection of plate with spigot Date Installed : 2009-03-24T00:00Z Geologic Characteristic : BEDROCK Bedrock Type : SEDIMENTARY Bedrock Condition : WEATHERED Fracture Spacing : Fault zones nearby : NO Distance/activity : Additional Information : 2. Site Location Information City or Town : Bairnsdale State or Province : Victoria Country : Australia Tectonic Plate : AUSTRALIAN Approximate Position (ITRF) X coordinate (m) : -4265638.5563 Y coordinate (m) : 2701208.9086 Z coordinate (m) : -3884372.5668 Latitude (N is +) : -374530.97 Longitude (E is +) : +1473921.70 Elevation (m,ellips.) : 125.9 Additional Information : Updated coords to GDA2020 values 3. GNSS Receiver Information 3.1 Receiver Type : LEICA GRX1200GGPRO Satellite System : GPS+GLO Serial Number : 353283 Firmware Version : 7.01 Elevation Cutoff Setting : 0 deg Date Installed : 2009-03-24T00:00Z Date Removed : 2009-09-21T23:59Z Temperature Stabiliz. : none Additional Information : 3.2 Receiver Type : LEICA GRX1200GGPRO Satellite System : GPS+GLO Serial Number : 353283 Firmware Version : 7.53 Elevation Cutoff Setting : 0 deg Date Installed : 2009-09-22T00:00Z Date Removed : 2010-04-01T00:00Z Temperature Stabiliz. : none Additional Information : 3.3 Receiver Type : LEICA GRX1200GGPRO Satellite System : GPS+GLO Serial Number : 353283 Firmware Version : 7.80 Elevation Cutoff Setting : 0 deg Date Installed : 2010-04-01T00:00Z Date Removed : 2010-05-03T00:00Z Temperature Stabiliz. : none Additional Information : 3.4 Receiver Type : LEICA GRX1200GGPRO Satellite System : GPS+GLO Serial Number : 353283 Firmware Version : 7.80/3.019 Elevation Cutoff Setting : 0 deg Date Installed : 2010-05-03T00:00Z Date Removed : 2012-11-30T00:00Z Temperature Stabiliz. : none Additional Information : ME upgrade due to GLONASS tracking problem. 3.5 Receiver Type : LEICA GR25 Satellite System : GPS+GLO Serial Number : 1830274 Firmware Version : 2.61/6.111 Elevation Cutoff Setting : 0 deg Date Installed : 2012-11-30T00:00Z Date Removed : 2014-12-09T05:30Z Temperature Stabiliz. : none Additional Information : 3.6 Receiver Type : LEICA GR25 Satellite System : GPS+GLO Serial Number : 1830274 Firmware Version : 3.11.1639/6.403 Elevation Cutoff Setting : 0 deg Date Installed : 2014-12-09T05:30Z Date Removed : 2017-07-19T00:00Z Temperature Stabiliz. : none Additional Information : Updated date removed as we activated : GAL/BDS/QZSS on 19/07/2017 3.7 Receiver Type : LEICA GR25 Satellite System : QZSS+GPS+GAL+GLO+BDS Serial Number : 1830274 Firmware Version : 3.11.1639/6.403 Elevation Cutoff Setting : 0 deg Date Installed : 2017-07-19T00:00Z Date Removed : 2018-10-17T04:04Z Temperature Stabiliz. : none Additional Information : Updated date installed as we activated : GAL/BDS/QZSS on 19/07/2017 3.8 Receiver Type : LEICA GR25 Satellite System : GPS+QZSS+GLO+GAL+BDS Serial Number : 1830274 Firmware Version : 4.31 Elevation Cutoff Setting : 0 deg Date Installed : 2018-10-17T04:04Z Date Removed : 2019-11-20T21:18Z Temperature Stabiliz. : none Additional Information : Receiver decommissioned, new receiver installed 3.9 Receiver Type : LEICA GR50 Satellite System : QZSS+GPS+GLO+GAL+BDS Serial Number : 1871037 Firmware Version : 4.35.183 Elevation Cutoff Setting : 5 deg Date Installed : 2019-11-20T21:18Z Date Removed : 2020-08-27T02:02Z Temperature Stabiliz. : none Additional Information : New receiver installed, update SN 3.10 Receiver Type : LEICA GR50 Satellite System : QZSS+GPS+GLO+GAL+BDS Serial Number : 1871037 Firmware Version : 4.35.188 Elevation Cutoff Setting : 5 deg Date Installed : 2020-08-27T02:02Z Date Removed : 2021-06-23T06:10Z Temperature Stabiliz. : none Additional Information : FW updated, S/N updated 3.11 Receiver Type : LEICA GR50 Satellite System : QZSS+GPS+GLO+GAL+BDS Serial Number : 1871037 Firmware Version : 4.50.274 Elevation Cutoff Setting : 5 deg Date Installed : 2021-06-23T06:10Z Date Removed : 2021-11-03T02:50Z Temperature Stabiliz. : none Additional Information : FW update 3.12 Receiver Type : LEICA GR50 Satellite System : QZSS+GPS+GLO+GAL+BDS Serial Number : 1871037 Firmware Version : 4.51.489 Elevation Cutoff Setting : 5 deg Date Installed : 2021-11-03T02:50Z Date Removed : 2022-01-31T23:30Z Temperature Stabiliz. : none Additional Information : Updated FW 3.13 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 6102R40001 Firmware Version : 5.45 Elevation Cutoff Setting : 0 deg Date Installed : 2022-01-31T23:30Z Date Removed : 2022-10-31T01:25Z Temperature Stabiliz. : none Additional Information : 3.14 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 6102R40001 Firmware Version : 6.15 Elevation Cutoff Setting : 0 deg Date Installed : 2022-10-31T01:25Z Date Removed : 2023-11-28T03:25Z Temperature Stabiliz. : none Additional Information : Update firmware only 3.15 Receiver Type : TRIMBLE ALLOY Satellite System : GPS+GLO+GAL+BDS+QZSS Serial Number : 6102R40001 Firmware Version : 6.21 Elevation Cutoff Setting : 0 deg Date Installed : 2023-11-28T03:25Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : none Additional Information : Firmware update only. 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : (deg) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : (multiple lines) 4. GNSS Antenna Information 4.1 Antenna Type : LEIAT504GG SCIS Serial Number : 200248 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : SCIS Radome Serial Number : Antenna Cable Type : Huber+Suhner Antenna Cable Length : 30.0 m Date Installed : 2009-03-24T00:00Z Date Removed : 2020-12-07T00:10Z Additional Information : Antenna replaced 4.2 Antenna Type : LEIAR25.R4 SCIS Serial Number : 726827 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0030 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : SCIS Radome Serial Number : Antenna Cable Type : Huber+Suhner Antenna Cable Length : 30.0 m Date Installed : 2020-12-07T00:10Z Date Removed : 2021-01-07T00:59Z Additional Information : New Antenna installed 4.3 Antenna Type : LEIAR25.R4 NONE Serial Number : 726827 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0030 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0 deg Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : Huber+Suhner Antenna Cable Length : 30.0 m Date Installed : 2021-01-07T00:59Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : Removed SCIS radome 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) : (F8.4) Marker->ARP North Ecc(m) : (F8.4) Marker->ARP East Ecc(m) : (F8.4) Alignment from True N : (deg; + is clockwise/east) Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 5. Surveyed Local Ties 5.1 Tied Marker Name : PILLAR Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 2.7049 dy (m) : 0.1444 dz (m) : -2.7942 Accuracy (mm) : 1.0 Survey method : TRIANGULATION Date Measured : 2014-07-09T00:00Z Additional Information : 5.2 Tied Marker Name : RM1 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 1.2593 dy (m) : -6.6442 dz (m) : -2.5924 Accuracy (mm) : 1.0 Survey method : TRIANGULATION Date Measured : 2014-07-09T00:00Z Additional Information : 5.3 Tied Marker Name : RM2 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : 10.7298 dy (m) : 3.7285 dz (m) : -5.42 Accuracy (mm) : 1.0 Survey method : TRIANGULATION Date Measured : 2014-07-09T00:00Z Additional Information : 5.4 Tied Marker Name : RM3 Tied Marker Usage : LOCAL CONTROL Tied Marker CDP Number : Tied Marker DOMES Number : Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : -2.1015 dy (m) : 2.9156 dz (m) : 8.2776 Accuracy (mm) : 1.0 Survey method : TRIANGULATION Date Measured : 2014-07-09T00:00Z Additional Information : 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : (m) dy (m) : (m) dz (m) : (m) Accuracy (mm) : (mm) Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : (multiple lines) 6. Frequency Standard 6.1 Standard Type : QUARTZ/INTERNAL Input Frequency : 5 MHz Effective Dates : 2009-03-24/(CCYY-MM-DD) Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8. Meteorological Instrumentation 8.1.1 Humidity Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 107124 Data Sampling Interval : 30 sec Accuracy (% rel h) : 2.00 Aspiration : UNASPIRATED Height Diff to Ant : 0.0 m Calibration date : (CCYY-MM-DD) Effective Dates : 2009-03-24/2022-01-31 Notes : (multiple lines) 8.1.2 Humidity Sensor Model : WXT530 Manufacturer : Vaisala Serial Number : S4620817 Data Sampling Interval : Accuracy (% rel h) : 3.00 Aspiration : Height Diff to Ant : 1.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2022-01-31/(CCYY-MM-DD) Notes : 1.5m standard design offset, instrument is 3m : above ground level 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.2.1 Pressure Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 107124 Data Sampling Interval : 30 sec Accuracy : 0.08 hPa Height Diff to Ant : 0.074 m Calibration date : (CCYY-MM-DD) Effective Dates : 2009-03-24/2022-01-31 Notes : 8.2.2 Pressure Sensor Model : WXT530 Manufacturer : Vaisala Serial Number : S4620817 Data Sampling Interval : Accuracy : 0.50 hPa Height Diff to Ant : 1.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2022-01-31/(CCYY-MM-DD) Notes : 1.5m standard design offset, instrument is 3m : above ground level 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.3.1 Temp. Sensor Model : PAROSCIENTIFIC MET4 Manufacturer : Paroscientific Serial Number : 107124 Data Sampling Interval : 30 sec Accuracy : 0.50 deg Aspiration : UNASPIRATED Height Diff to Ant : 0.0 m Calibration date : (CCYY-MM-DD) Effective Dates : 2009-03-24/2022-01-31 Notes : 8.3.2 Temp. Sensor Model : WXT530 Manufacturer : Vaisala Serial Number : S4620817 Data Sampling Interval : Accuracy : 0.30 deg Aspiration : Height Diff to Ant : 1.5 m Calibration date : (CCYY-MM-DD) Effective Dates : 2022-01-31/(CCYY-MM-DD) Notes : 1.5m standard design offset, instrument is 3m : above ground level 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Dept. of Environment & Primary Industries Preferred Abbreviation : Mailing Address : Level 13, 570 Bourke St, Melbourne, VIC 3000 Primary Contact Contact Name : Hayden Asmussen Telephone (primary) : (03) 8636 2374 Telephone (secondary) : Fax : (03) 8636 2813 E-mail : Hayden.Asmussen@depi.vic.gov.au Secondary Contact Contact Name : GPSnet Support Telephone (primary) : Telephone (secondary) : Fax : (03) 8636 2813 E-mail : GPSnet.support@dse.vic.gov.au Additional Information : (multiple lines) 12. Responsible Agency (if different from 11.) Agency : Geoscience Australia Preferred Abbreviation : Mailing Address : Geoscience Australia GPO Box 378 Canberra ACT 2601 AUSTRALIA Primary Contact Contact Name : Michael Moore Telephone (primary) : +61 2 6249 9052 Telephone (secondary) : 0413 604169 (mobile) Fax : +61 2 6249 9929 E-mail : Michael.Moore@ga.gov.au Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : (multiple lines) 13. More Information Primary Data Center : GA (ftp.ga.gov.au) Secondary Data Center : http://www.gpsnet.com.au URL for More Information : http://gnss.vicpos.com.au/Map/SensorMap.aspx Hardcopy on File Site Map : Y Site Diagram : Y Horizon Mask : Y Monument Description : Y Site Pictures : Y Additional Information : Antenna Graphics with Dimensions (insert text graphic from file antenna.gra)