ALB4 Site Information Form (site log) International GNSS Service See Instructions at: ftp://igs.org/pub/station/general/sitelog_instr.txt 0. Form Prepared by (full name) : Curtis Bernard Date Prepared : 2019-10-25 Report Type : UPDATE If Update: Previous Site Log : alb4_20190211.log Modified/Added Sections : 3.8, 3.9 1. Site Identification of the GNSS Monument Site Name : ALB4 CACS-CGS Four Character ID : ALB4 Monument Inscription : M167001 IERS DOMES Number : 40129M008 CDP Number : Monument Description : 0.125m diameter stainless steel cylinder Height of the Monument : 2.00 (m) Monument Foundation : 0.125m steel casing cemented into bedrock Foundation Depth : 6.00 (m) Marker Description : 0.15m welded cap with a centered 5/8 inch bolt Date Installed : 2016-03-04T00:00Z Geologic Characteristic : Bedrock Bedrock Type : Igneous/Metamorphic Bedrock Condition : Weathered Fracture Spacing : over 200cm Fault zones nearby : Distance/activity : Additional Information : The GNSS reference mark consists of a 0.125 m : diameter steel cylinder, 2 m high above : ground : and drilled into bedrock to a depth of : approx. : 6 m. The top of the monument is fitted with : a 0.15m diameter stainless steel cap welded : to the pipe and fitted with a self centering : 5/8 inch bolt. The top of the stainless : steel : cap serves as the ARP. : This GNSS site is collocated with GNSS site : ALBH, and Mobile VLBI mark 7289. : 2. Site Location Information City or Town : Victoria State or Province : BC Country : Canada Tectonic Plate : North American Approximate Position (ITRF) X coordinate (m) : -2341347.89 Y coordinate (m) : -3539043.05 Z coordinate (m) : 4745787.64 Latitude (N is +) : +482323.10 Longitude (E is +) : -1232915.55 Elevation (m,ellips.) : 30.80 Additional Information : ALB4 is a continuously tracking GNSS site. : This station is part of the : Canadian Active Control System(CACS) and is : located near Victoria, British Columbia. : This station is collocated with GNSS Station : ALBH. : NOTE: these coordinates are approximate; : coordinates should not be used to constrain : site in data processing 3. GNSS Receiver Information 3.1 Receiver Type : SEPT POLARX4TR Satellite System : GPS+GLO+GAL+QZSS+SBAS Serial Number : 3102237 Firmware Version : 2.9.0 Elevation Cutoff Setting : 0 Date Installed : 2016-03-06T16:00Z Date Removed : 2016-03-18T21:20Z Temperature Stabiliz. : Additional Information : 3.2 Receiver Type : SEPT POLARX4TR Satellite System : GPS+GLO+GAL+QZSS+SBAS Serial Number : 3102237 Firmware Version : 2.9.2 Elevation Cutoff Setting : 0 Date Installed : 2016-03-18T21:30Z Date Removed : 2016-06-24T14:10Z Temperature Stabiliz. : Additional Information : 3.3 Receiver Type : SEPT POLARX4TR Satellite System : GPS+GLO+GAL+QZSS+SBAS Serial Number : 3102237 Firmware Version : 2.9.3 Elevation Cutoff Setting : 0 Date Installed : 2016-06-24T14:20Z Date Removed : 2016-10-27T18:20Z Temperature Stabiliz. : Additional Information : 3.4 Receiver Type : SEPT POLARX4TR Satellite System : GPS+GLO+GAL+QZSS+SBAS Serial Number : 3102237 Firmware Version : 2.9.5 Elevation Cutoff Setting : 0 Date Installed : 2016-10-27T18:30Z Date Removed : 2016-12-21T17:10Z Temperature Stabiliz. : Additional Information : 3.5 Receiver Type : SEPT POLARX4TR Satellite System : GPS+GLO+GAL+QZSS+SBAS Serial Number : 3102237 Firmware Version : 2.9.6 Elevation Cutoff Setting : 0 Date Installed : 2016-12-21T17:20Z Date Removed : 2018-04-13T16:18Z Temperature Stabiliz. : Additional Information : 3.6 Receiver Type : SEPT POLARX4TR Satellite System : GPS+GLO+GAL+QZSS+SBAS Serial Number : 3102237 Firmware Version : 2.9.6 Elevation Cutoff Setting : 5 Date Installed : 2018-04-13T16:19Z Date Removed : 2019-01-16T16:46Z Temperature Stabiliz. : Additional Information : 3.7 Receiver Type : TPS NET-G3A Satellite System : GPS+GLO Serial Number : 618-02357 Firmware Version : 3.6 Dec,04,2012 p1 Elevation Cutoff Setting : 5 Date Installed : 2019-01-16T21:58Z Date Removed : 2019-02-11T17:31Z Temperature Stabiliz. : Additional Information : 3.8 Receiver Type : TPS NET-G3A Satellite System : GPS+GLO Serial Number : 618-02357 Firmware Version : 4.7 Nov,23,2017 p6 Elevation Cutoff Setting : 5 Date Installed : 2019-02-11T17:41Z Date Removed : 2019-10-22T19:31Z Temperature Stabiliz. : Additional Information : 3.9 Receiver Type : JAVAD TRE_G3TH DELTA Satellite System : GPS+GLO+GAL Serial Number : 01864 Firmware Version : 3.7.5p1 Jan,23,2019 Elevation Cutoff Setting : 5 Date Installed : 2019-10-22T20:10Z Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : Additional Information : 3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions) Satellite System : (GPS+GLO+GAL+BDS+QZSS+SBAS) Serial Number : (A20, but note the first A5 is used in SINEX) Firmware Version : (A11) Elevation Cutoff Setting : Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Temperature Stabiliz. : (none or tolerance in degrees C) Additional Information : 4. GNSS Antenna Information 4.1 Antenna Type : TPSCR.G3 NONE Serial Number : 383-0921 Antenna Reference Point : BPA Marker->ARP Up Ecc. (m) : 000.0000 Marker->ARP North Ecc(m) : 000.0000 Marker->ARP East Ecc(m) : 000.0000 Alignment from True N : 0.0 Antenna Radome Type : NONE Radome Serial Number : Antenna Cable Type : LMR-400 Antenna Cable Length : 30.00 (m) Date Installed : 2016-03-06T16:00Z Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : 4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions) Serial Number : (A*, but note the first A5 is used in SINEX) Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.) Marker->ARP Up Ecc. (m) :(F8.4) Marker->ARP North Ecc(m) :(F8.4) Marker->ARP East Ecc(m) :(F8.4) Alignment from True N : Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions) Radome Serial Number : Antenna Cable Type : (vendor & type number) Antenna Cable Length : (m) Date Installed : (CCYY-MM-DDThh:mmZ) Date Removed : (CCYY-MM-DDThh:mmZ) Additional Information : 5. Surveyed Local Ties 5.x Tied Marker Name : Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc) Tied Marker CDP Number : (A4) Tied Marker DOMES Number : (A9) Differential Components from GNSS Marker to the tied monument (ITRS) dx (m) : dy (m) : dz (m) : Accuracy (mm) : Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc) Date Measured : (CCYY-MM-DDThh:mmZ) Additional Information : 6. Frequency Standard 6.1 Standard Type : RUBIDIUM Input Frequency : 10 MHz Effective Dates : 2016-03-06/2016-09-26 Notes : 6.2 Standard Type : H-MASER Input Frequency : 10 MHz Effective Dates : 2016-09-26/2018-12-21 Notes : 6.3 Standard Type : INTERNAL Input Frequency : 10 MHz Effective Dates : 2018-12-24/2019-01-16 Notes : 6.4 Standard Type : H-MASER Input Frequency : 5 MHz Effective Dates : 2019-01-16 Notes : 6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc) Input Frequency : (if external) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : 7. Collocation Information 7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc) Status : (PERMANENT/MOBILE) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : 8. Meteorological Instrumentation 8.1.x Humidity Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy (% rel h) : (% rel h) (% rel h) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : 8.2.x Pressure Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (hPa) Aspiration : Height Diff to Ant : (CCYY-MM-DD) (m) Calibration date : (CCYY-MM-DD/CCYY-MM-DD) Effective Dates : Notes : 8.3.x Temp. Sensor Model : Manufacturer : Serial Number : Data Sampling Interval : (sec) Accuracy : (deg C) Aspiration : (UNASPIRATED/NATURAL/FAN/etc) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : 8.4.x Water Vapor Radiometer : Manufacturer : Serial Number : Distance to Antenna : (m) Height Diff to Ant : (m) Calibration date : (CCYY-MM-DD) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Notes : (multiple lines) 8.5.x Other Instrumentation : (multiple lines) 9. Local Ongoing Conditions Possibly Affecting Computed Position 9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc) Observed Degradations : (SN RATIO/DATA GAPS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : 9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 9.3.x Signal Obstructions : (TREES/BUILDLINGS/etc) Effective Dates : (CCYY-MM-DD/CCYY-MM-DD) Additional Information : (multiple lines) 10. Local Episodic Effects Possibly Affecting Data Quality 10.x Date : (CCYY-MM-DD/CCYY-MM-DD) Event : (TREE CLEARING/CONSTRUCTION/etc) 11. On-Site, Point of Contact Agency Information Agency : Preferred Abbreviation : NRCan/CGS Mailing Address : Primary Contact Contact Name : Mark Caissy Telephone (primary) : 613-371-3817 Telephone (secondary) : Fax : E-mail : mark.caissy@canada.ca Secondary Contact Contact Name : Stuart Elson Telephone (primary) : 613-799-4761 Telephone (secondary) : Fax : E-mail : stuart.elson@canada.ca Additional Information : 12. Responsible Agency (if different from 11.) Agency : (multiple lines) Preferred Abbreviation : (A10) Mailing Address : Primary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Secondary Contact Contact Name : Telephone (primary) : Telephone (secondary) : Fax : E-mail : Additional Information : 13. More Information Primary Data Center : NRCan Secondary Data Center : URL for More Information : http://webapp.geod.nrcan.gc.ca/geod/index.php Hardcopy on File Site Map : Site Diagram : Horizon Mask : Monument Description : Site Pictures : Additional Information : Antenna Graphics with Dimensions Type: TPSCR.G3 +-------+ / + \ | + | +-----------------+-------------+------------------+ <-- 0.1015 TCR | | | | | | | | +-+--------------------------------------------------+-+ +-------------------+-------------+--------------------+ <-- 0.0345 BCR | | | | +------x------+ <-- 0.000 BPA=ARP <-- 0.238 --> <-- 0.380 --> ARP: Antenna Reference Point MRP: Monument Reference Point L1 : L1 Phase Center L2 : L2 Phase Center TCR: Top of Chokering BCR: Bottom of Chokering TPA: Top of Preamplifier BPA: Bottom of Preamplifier